Pistons For 1330
#1
Posted 05 January 2022 - 11:31 AM
#2
Posted 05 January 2022 - 03:50 PM
#3
Posted 05 January 2022 - 03:52 PM
#4
Posted 05 January 2022 - 04:29 PM
It’s worth speaking to MED, they didn’t have standard bore 1275 pistons last year, but they got some made by Omega because enough people asked for them.
#5
Posted 06 January 2022 - 06:38 PM
go 1380 and get and get 11cc pistons.
#6
Posted 06 January 2022 - 06:50 PM
Did MED say that they would get some in if there was enough demand? They need to order 25 sets at a time, I asked in Feb ‘21 and they were available in the June.
#7
Posted 06 January 2022 - 07:15 PM
Spoke to MED and the car kitchen no one has them anymore. Now I have two options either sleeve the engine or
go 1380 and get and get 11cc pistons.
Alex got a set of forged pistons custom made, as in just one set and he could possibly get another made
#8
Posted 07 January 2022 - 03:40 PM
I've taken a set of 10cc powermaxes out to 15cc for turbo use before, I would think you should be able to get 6cc ones out to 10cc or close too, any extra could come out of the chambers?
Whats your setup and what compression do you need
#9
Posted 07 January 2022 - 05:22 PM
#10
Posted 07 January 2022 - 09:52 PM
#11
Posted 07 January 2022 - 10:24 PM
#12
Posted 08 January 2022 - 08:47 AM
From what I have read and what everyone's saying 8.5.1 is what to aim for
With a t2, you'll barely run any boost, and it'll be coming in much later, so a higher than normal compression ratio would work in your favour. I would only go around 9:1 though. I ran 15psi through similar CR on efi with good results.
Edited by Steve220, 08 January 2022 - 08:48 AM.
#13
Posted 08 January 2022 - 12:18 PM
The metro cup engines were allowed 8.65:1 and still no intercooler, and the made around 140hp iirc.
8.5:1 will definitely be on the safe side, but theres room to up it and make it more efficient. Theres a chap making around 150hp on 10:1
#14
Posted 08 January 2022 - 12:40 PM
Thats in a standard mpi isn't it?Std metro turbo was 9.3:1 with no intercooler, and 93hp,
The metro cup engines were allowed 8.65:1 and still no intercooler, and the made around 140hp iirc.
8.5:1 will definitely be on the safe side, but theres room to up it and make it more efficient. Theres a chap making around 150hp on 10:1
Edited by IronmanG, 08 January 2022 - 12:40 PM.
#15
Posted 08 January 2022 - 12:59 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users