273 replies to this topic

[ac427]

What is the purpose of floor bungs what do they do?

When the shells are produced, they are coated in the factory using a process called rotodipping.
These holes are punched out during manufacture so that when the shells have been dipped the excess coating can drain out.
The steel bungs are then fitted to seal up the holes prior to the antidrum being applied over the top.
 
Some people replace with rubber bungs, others plate the holes up entirely. I like the originality of these steel bungs personally.
 
It's a common misconception that the bungs are there to be removed to drain out water if necessary..

Is Antidrum a soundproofing coating?

[Ben_O]

 

 

What is the purpose of floor bungs what do they do?

When the shells are produced, they are coated in the factory using a process called rotodipping.
These holes are punched out during manufacture so that when the shells have been dipped the excess coating can drain out.
The steel bungs are then fitted to seal up the holes prior to the antidrum being applied over the top.
 
Some people replace with rubber bungs, others plate the holes up entirely. I like the originality of these steel bungs personally.
 
It's a common misconception that the bungs are there to be removed to drain out water if necessary..

Is Antidrum a soundproofing coating?

 

Not particually.

It is for the purpose of taking the drum out of larger panels 

 

Cheers

Ben 

[Magneto]

Where do you get those meltable bung hole plugs?

[ac427]

Where do you get those meltable bung hole plugs?

You have TV?

[ac427]

What is the purpose of floor bungs what do they do?

When the shells are produced, they are coated in the factory using a process called rotodipping.
These holes are punched out during manufacture so that when the shells have been dipped the excess coating can drain out.
The steel bungs are then fitted to seal up the holes prior to the antidrum being applied over the top.
 
Some people replace with rubber bungs, others plate the holes up entirely. I like the originality of these steel bungs personally.
 
It's a common misconception that the bungs are there to be removed to drain out water if necessary..

Is Antidrum a soundproofing coating?

Not particually.
It is for the purpose of taking the drum out of larger panels 
 
Cheers
Ben

Thanks Ben, Do you mean drum as in resonance?

[Ben_O]

 

 

 

 

What is the purpose of floor bungs what do they do?

When the shells are produced, they are coated in the factory using a process called rotodipping.
These holes are punched out during manufacture so that when the shells have been dipped the excess coating can drain out.
The steel bungs are then fitted to seal up the holes prior to the antidrum being applied over the top.
 
Some people replace with rubber bungs, others plate the holes up entirely. I like the originality of these steel bungs personally.
 
It's a common misconception that the bungs are there to be removed to drain out water if necessary..

Is Antidrum a soundproofing coating?

Not particually.
It is for the purpose of taking the drum out of larger panels 
 
Cheers
Ben

Thanks Ben, Do you mean drum as in resonance?

 

Yes, that's right

[Ben_O]

Where do you get those meltable bung hole plugs?

Minispares sell them

http://www.minispare...|Back to search

[stuart bowes]

 

huhuhuuhuh

 

bunghole

[Ben_O]

Finally some progress on this one.

 

I've been waiting on my paint supplier to deliver the materials for the next stage.

 

I out the shell into the booth and applied some more primer to some areas where I'd gone through and where additional rectifications were required

 

 

 

Then sheeted up ready to paint the underside

 

 

 

And then applied tinted underbody coatings followed by clear coat.

 

 

 

Plan tomorrow is to paint the inside of the shell, the engine compartment and the boot.

There is lots to do prior though so hopefully time will allow.

 

Cheers

Ben 

[Ben_O]

The photos and the textured finished don't do the colour justice.i prepared some spray out cards and photographed those.

These also don't do it justice but you can see how different it looks in different lights

 

 

 

Colour is Nissan TV2 bayside blue.

 

Cheers 

Ben

[Fred&Rex]

I’m liking the colour very much, looking forward to the outside panels, looks great underneath…
Did you sort the arches out in the end??

Great progress

Thanks

Daz

[Crazy]

Think I made the right choice there Ben to go with the colour I chose all those years ago and not flick it to the alternative.

[MrBounce]

Fabulous!! 

[Ben_O]

Back in the booth this morning for final prep of the inside, boot and engine bay.

 

 

Then the final bit of sealing up for now.

 

 

 

And then colour

 

 

 

 

 

 

 

Now that's a colour!

Good choice luke.

 

Cheers

Ben 

[Crazy]

Holy smokes Ben that looks even better than I imagined that colour being on the mini,which was why I was unsure so glad I stuck with it.

Can't wait to see the exterior done painted.