Jump to content


Photo
- - - - -

Mot Advisories On Potential Purchase

suspension

  • Please log in to reply
5 replies to this topic

#1 billlifferr

billlifferr

    Starting My Mini Up

  • Noobies
  • Pip
  • 1 posts
  • Location: West Sussex

Posted 12 June 2023 - 01:07 PM

Hi all,

I'm looking to purchase a Rover Mini and am currently looking at a 1998 Cooper (Mk VII). The latest MOT had the following advisories:

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

  • Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Should these be of concern?



#2 Cooperman

Cooperman

    Uncle Cooperman, Voted Mr TMF 2011

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 23,039 posts
  • Location: Cambs.
  • Local Club: MCR, HAMOC, Chelmsford M.C.

Posted 12 June 2023 - 10:41 PM

You need a Mini expert to look at the rear suspension mounting.
The ball joint is easy to rectify.
However, the main thing is to check for corrosion in all the other well-known Mini rust areas.
If you are unaware of where these are do not buy any Mini until you find an expert who will inspect it for you.

#3 nicklouse

nicklouse

    Moved Into The Garage

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 17,945 posts
  • Location: Not Yorkshire
  • Local Club: Anonyme Miniholiker

Posted 12 June 2023 - 11:22 PM

Sounds like I fair MOT. Should be easily sorted. I would be more wary of one that said clean bill of health.



#4 floormanager

floormanager

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 620 posts
  • Location: Haywards Heath, West Sussex
  • Local Club: Mini Club Sussex

Posted 13 June 2023 - 06:54 AM

I'm in Sussex if you need advice / help



#5 mbolt998

mbolt998

    Mini Mad

  • Members
  • PipPipPipPip
  • 273 posts
  • Location: East Anglia

Posted 13 June 2023 - 07:06 AM

Hi all,

I'm looking to purchase a Rover Mini and am currently looking at a 1998 Cooper (Mk VII). The latest MOT had the following advisories:

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

  • Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Should these be of concern?

 

If those were the only problems then you have a minter! The ball joints often have a bit of play and are cheap and fairly easy to replace. I would sort out the corrosion asap. It's not clear if they're talking about the body or the subframe.
 



#6 bpirie1000

bpirie1000

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,119 posts
  • Location: Aberdeenshire
  • Local Club: Amoc

Posted 13 June 2023 - 10:21 AM

I would say join your local mini club and make friends quickly...


They are a font of knowledge and if you get the right person they can fix or point you to the mini friendly grages in your area....





Also tagged with one or more of these keywords: suspension

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users