Jump to content


Photo
- - - - -

Missfire On Start Up


  • Please log in to reply
7 replies to this topic

#1 gazza4266

gazza4266

    Learner Driver

  • Noobies
  • PipPip
  • 20 posts
  • Location: Manningtree

Posted 24 February 2024 - 12:44 PM

Hi all.
Ive got my mini sprite running after 2 months.
Ive had new plugs leads /coil /dizzy /distributor/battery/alternator.
I’ve turned dizzy enough to get going and runs fine when warm.but still slight missfire on initial start up.is there a way to stop this.thanks all.you’ve been a great help so far

#2 Ethel

Ethel

    ..is NOT a girl!

  • TMF Team
  • PipPipPipPipPipPipPipPipPipPipPip
  • 25,417 posts
  • Local Club: none

Posted 24 February 2024 - 05:45 PM

Is there more info on your ignition setup?

 

It could be ignition or fuelling, but it's best to start fault hunting with the ignition first. Do you have a timing strobe and/or dwell meter?



#3 Lplus

Lplus

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 555 posts
  • Location: Hampshire

Posted 24 February 2024 - 06:36 PM

Hi all.
Ive got my mini sprite running after 2 months.
Ive had new plugs leads /coil /dizzy /distributor/battery/alternator.
I’ve turned dizzy enough to get going and runs fine when warm.but still slight missfire on initial start up.is there a way to stop this.thanks all.you’ve been a great help so far

Is it a single cylinder misfiring, or a general hesitancy?



#4 gazza4266

gazza4266

    Learner Driver

  • Noobies
  • PipPip
  • 20 posts
  • Location: Manningtree

Posted 24 February 2024 - 10:22 PM

Hi all i dont have strobe or dwell
And it only pops on intial start so i can’t tell if its single pot or not.fuel is no issue as runs fine .
I think just needs tweek on timing as i only guessed by sound when turning dizzy.
Oh and how do you check timing with strobe.excuse ignorance but i had mini 35 years ago so technical is not my strong point.I think i did well just to get it started with many bashes and cuts to hands lol.

#5 Midas Mk1

Midas Mk1

    Crazy About Mini's

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPip
  • 5,644 posts
  • Location: Manchester
  • Local Club: S.U.N.M.C

Posted 24 February 2024 - 11:50 PM

Old fuel, founded up plugs.

Clean, or new plugs, gapped correctly, fresh fuel, don’t just warm up and idle, warm up and drive to temperature.

#6 68+86auto

68+86auto

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 338 posts
  • Location: Brisbane, Australia
  • Local Club: Queensland Mini Car Club

Posted 26 February 2024 - 01:20 PM

Hi all i dont have strobe or dwell
And it only pops on intial start so i can’t tell if its single pot or not.fuel is no issue as runs fine .
I think just needs tweek on timing as i only guessed by sound when turning dizzy.
Oh and how do you check timing with strobe.excuse ignorance but i had mini 35 years ago so technical is not my strong point.I think i did well just to get it started with many bashes and cuts to hands lol.

The timing light "freezes" the position of the mark and allows you to line it up with the other marks. Steveson motor co has an ok video (not perfect)

You really need to get a timing light, it is not optional.

Edited by 68+86auto, 26 February 2024 - 01:20 PM.


#7 gazza4266

gazza4266

    Learner Driver

  • Noobies
  • PipPip
  • 20 posts
  • Location: Manningtree

Posted 26 February 2024 - 02:27 PM

Thanks all
Will get timing light and go from there.
Top info cheers all

#8 68+86auto

68+86auto

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 338 posts
  • Location: Brisbane, Australia
  • Local Club: Queensland Mini Car Club

Posted 27 February 2024 - 06:08 AM

Thanks all
Will get timing light and go from there.
Top info cheers all

 

If you can get a timing light with advance it will be best.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users