Looked everywhere online and can't find either a part number or any evidence of one in parts diagrams. There must be one as you need to keep fumes out the cabin? I bought the blanking plug thinking i could make a hole in it however it is quite thick and not very pliable. I might have a land rover one somewhere but would rather the proper one for a 1987 2 clock city e.
Speedo Cable Grommet
Started by
m1n1
, Mar 03 2024 10:18 PM
2 replies to this topic
#1
Posted 03 March 2024 - 10:18 PM
#2
Posted 04 March 2024 - 05:36 PM
I just used one of the generic 1" blanking plugs - drilled a hole and then cut it on a radius as I was not removing the speedo cable just to fit a grommet. My oil pressure pipe also goes through the same hole.
20240304_165132.jpg 54.23K 1 downloads
#3
Posted 04 March 2024 - 09:32 PM
I think that and a dab of glue might do the job, like a glue together cv boot. I will do that!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users