Hi all, anyone know how a heritage mk1 quarter panel fits, someone else removed the original one and not sure if the new one overlaps the part of the b post, it almost looks like the quarter panel and b post were all one, any advice would be greatly appreciated, thanks
Mk1 Quarter Panel
Started by
Hugh92
, Mar 08 2024 10:12 PM
3 replies to this topic
#1
Posted 08 March 2024 - 10:12 PM
#2
Posted 09 March 2024 - 08:48 AM
Originally the whole side of the car up to the roof would be one piece,Steve..
#3
Posted 09 March 2024 - 08:27 PM
Hi, yes that would make sense,so if I overlap the return lip on the new panel over the inside edge of the b post then i am effectively narrowing the door opening so I think the best way is to cut the lip on the b post and butt weld the quarter panel to it, this would sort of confirm that I thought the quarter panel had to move 2-3 mm rearward, hope this makes sense as it is very hard to explain, thanks alot
#4
Posted 09 March 2024 - 08:37 PM
The quarter wraps around the B post and is spot welded along the door return.Has this been removed?Steve..
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users