2) what are their exact size to get new ones?
3) PB Blaster and a hammer will get them out, yes?
Attached Files
-
image0.jpeg 64.24K
2 downloads
Bolt From Cat Converter To Exhaust
Started by
JDMRoverMini
, May 18 2024 07:33 PM
3 replies to this topic
#1
JDMRoverMini
-
- Noobies
-
- 96 posts
Stage One Kit Fitted
- Location: Chicago
Posted 18 May 2024 - 07:33 PM
1) are they attached to the cat converter, or will they come out?
2) what are their exact size to get new ones?
3) PB Blaster and a hammer will get them out, yes?
2) what are their exact size to get new ones?
3) PB Blaster and a hammer will get them out, yes?
#2
JDMRoverMini
-
- Noobies
-
- 96 posts
Stage One Kit Fitted
- Location: Chicago
Posted 18 May 2024 - 07:53 PM
Why is my photo upside down? Weird.
#3
sonscar
-
- Members
-
- 3,241 posts
Up Into Fourth
- Location: crowle
- Local Club: none
Posted 18 May 2024 - 08:39 PM
I would resist hammering on the cat as the matrix is fairly fragile.I would drill them out and use a standard nut and bolt.Steve..
#4
JDMRoverMini
-
- Noobies
-
- 96 posts
Stage One Kit Fitted
- Location: Chicago
Posted 18 May 2024 - 08:41 PM
I would resist hammering on the cat as the matrix is fairly fragile.I would drill them out and use a standard nut and bolt.Steve..
So the bolts are attached to the cat?
Can I cut off the head of the bolt? Would that work, or need to drill from the tip towards the head?
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
