2 replies to this topic

[JXC Mini GT]

My 1968 Cooper S has a KAD gearlever installed, however today when making a local trip the gearlever came out in my hand.

 

Grateful if someone would help me with the correct order of spacers, spring, plastic washer etc

 

I have attached some photos which may help, I have fitted the KAD spacer below but this may be incorrect

 

 

 

Many thanks

John

Edited by JXC Mini GT, 19 May 2024 - 01:45 PM.

[imack]

KAD space on remote (cupped side up), gear lever into KAD spacer, nylon washer (stepped side up) on top of gear lever ball, spring on top of nylon washer, original spacer ontop of KAD spacer, top plate which compresses spring.

Attached Files

•  Screenshot_20240519_154542_Gallery.jpg   67.8K   4 downloads

Edited by imack, 19 May 2024 - 03:13 PM.

[JXC Mini GT]

KAD space on remote (cupped side up), gear lever into KAD spacer, nylon washer (stepped side up) on top of gear lever ball, spring on top of nylon washer, original spacer ontop of KAD spacer, top plate which compresses spring.

Thank you, that's great.