My dizzy is leaking oil from one of the holes in the lower dizzy body so I suspect the bushings are worn and a replacement dizzy is needed.
Powerspark advertise dizzy with 998 specific curves.
Has anyone one used these? I know AC mentionens most places are selling generic dizzys with incorrect curves.
Ideally id get one from AC. But he is too busy at the moment.
Has anyone used any particular ones with good success
New Distributor Needed Due To Oil Leak.
Started by
Earley86
, Today, 01:23 PM
3 replies to this topic
#2
nicklouse
-
- TMF+ Member
-
- 19,018 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted Today, 05:56 PM
Sure it is not just the O ring.
#3
Spider
-
- Admin
-
- 15,760 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted Today, 07:22 PM
Been a while but I found they didn't have the right curve.
The only ones off the shelf that I've found are right are from Mini Spares and Moss.
#4
Rubbershorts
-
- TMF+ Member
-
- 701 posts
One Carb Or Two?
- Location: Bradford-ish
Posted Today, 07:58 PM
My dizzy is leaking oil from one of the holes in the lower dizzy body so I suspect the bushings are worn and a replacement dizzy is needed.
Powerspark advertise dizzy with 998 specific curves.
Has anyone one used these? I know AC mentionens most places are selling generic dizzys with incorrect curves.
Ideally id get one from AC. But he is too busy at the moment.
Has anyone used any particular ones with good success
Total Recurve. I can't remember the guys name but he has been trained by Mr Dodd in the recurving department. Daz.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
