No replies to this topic

[Andy3659]

Hi all,

I am restoring the front seats in my 1969 Riley Elf Mk III.  In each seat frame, in the mechanism to adjust the seat distance, there is a welded pin on one side and an old bolt, washer and nut combination on the other side.  I assume that the welded pin is original and the pin on the other side has broken at some stage.  What would most people do with this side: continue to use a bolt and nut or try to replace the pin?  Thanks for any experience you have!

 

 Picture1.jpg   37.44K   0 downloads

 

 Picture2.jpg   37.94K   0 downloads