Hi,
How is the rubber mounting block attached to the subframe, mine came off on a bump on the way home from work tonight? Is it easy to fix, could do with fixing so i can drive to wk tomorrow:-) Couldn't see in haynes/search...
Cheers All,
Danny
HELP - Exhaust Fallen Off
Started by
Danny Mini 30
, Jan 10 2007 09:56 PM
3 replies to this topic
#2
Dan
-
- TMF+ Member
-
- 21,354 posts
On Sabbatical
Posted 10 January 2007 - 10:02 PM
The forward mounting block is held by two screws which retain the steel baseplate of the mounting. The rear one is held by a nut which holds a stud projecting from it's plate. It is more likely that your mounting has sheared than simply fallen off, if so you need a new one.
#3
Danny Mini 30
-
- Noobies
-
- 69 posts
Stage One Kit Fitted
Posted 10 January 2007 - 10:08 PM
The forward mounting block is held by two screws which retain the steel baseplate of the mounting. The rear one is held by a nut which holds a stud projecting from it's plate. It is more likely that your mounting has sheared than simply fallen off, if so you need a new one.
yea i think that is what has happened, damn, could only see a flat metal plate when i looked under, rubber must have pulled off, damn, will have to be wire till payday then:=)
cheers dan, danny
#4
Woody
-
- Members
-
- 1,763 posts
Ring Runner 2005
Posted 11 January 2007 - 07:23 AM
dont worry , the new ones are only a couple of quid
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
