Hi all, im goin to be changing my cam soon, should i go for the phase 2 or 3? My engine spec is
998cc
Satge 1
12G295 head
HS4
ANy ideas? tell me wht you think
Cheers Smartie
Morspeed.. Phase 2 or 3?
Started by
01smartc
, Mar 23 2007 02:30 PM
4 replies to this topic
#1
Posted 23 March 2007 - 02:30 PM
#2
Posted 23 March 2007 - 02:58 PM
Hi all, im goin to be changing my cam soon, should i go for the phase 2 or 3? My engine spec is
998cc
Satge 1
12G295 head
HS4
ANy ideas? tell me wht you think
Cheers Smartie
oo very close to my spec except I have twin HS2's. I going to for a SW5 but I have been told the P2 is very good. give morspeed a call thay will beable to advise as they also sell kent etc.....
#3
Posted 23 March 2007 - 03:03 PM
What you after? - from your engine I mean...
#4
Posted 24 March 2007 - 11:37 AM
Just want more power, sum speed to burn off the chavs ... and to make overtaking easier!
#5
Posted 24 March 2007 - 12:28 PM
sorry for slightly hijacking this but i was about to ask a very similar question, from a very similar set up to what you have smartc,
after looking at the cam list in the FAQ http://www.theminifo...showtopic=36988
the Kent 246 , SW5 , and the morspeed phase 2 (from my very limited knowledge of cams) look to have a very similar profile, but which would you recommend?
after looking at the cam list in the FAQ http://www.theminifo...showtopic=36988
the Kent 246 , SW5 , and the morspeed phase 2 (from my very limited knowledge of cams) look to have a very similar profile, but which would you recommend?
Edited by cap'n crunch, 24 March 2007 - 02:22 PM.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users