68 replies to this topic

[chrisholland1983]

so you are fit


ooops said that out loud didnt i

[*Raz*]

so you are fit


ooops said that out loud didnt i

LOL pmsl

I wish to both of them

ahhh cant wait to get Monty baby back!!

Raz xXx

[Jammy]

I think it was the thermostat!

Any news from the mini dude yet?!

[screech]

Its all good. Monty is fixed, it was the thermostat

sorry? what did i say it was

[*Raz*]

Its all good. Monty is fixed, it was the thermostat

sorry? what did i say it was

ha, only just seen that reply! Alright Alright, you were right.... now solve this. . .

OK, last night i drove home from my mates house, got on the drive, got out the car and i could hear hissing. I could hear it coming from under the bonnet, and thought it could be the water thingy again, but it was about 2am and i couldn't be bothered to look, plus it was dark. Anywho, i've just checked and the water is EMPTY. I only filled it up the other day, and the time before that, i filled it up at the mini meet, on Thursday, it was really low then too.

When i filled it up today, it made a really funny humminh sound. . made me laugh! But it took a LOT of water again!!

If the Thermostat has been 'fixed' then it can't be that can it?

Any ideas

The warranty has run out now, ironically it ran out yesterday. GRR

Raz xXx

[*Raz*]

IGNORE THAT!!!!!!!! Just filled the water up, looked underneath and there is a puddle

NOT HAPPY

NOW WHAT AM I SUPPOSED TO DO?!?!?!?!

Thought i saw that at the mini meet but they said its where i spilt it when i topped it up, but i definately didnt spill it today!!

Grrr CARS!!

Raz xXx

Edit: i need to go out and can only get there by driving :s is that a bad idea?

Edited by *Raz*, 03 June 2007 - 12:58 PM.

[MissSportyGT]

Poor Monty

xXx

[*Raz*]

Right peeeeeps PLEASE HELP ME!!!

Its the hose that has gone, but i don't know which one i need to buy, so in a min i'm going to post up some photographs of Monty under the bonnet and an arrow to the bit that has broken and can ya help me get the right product on mini spares please. I have just been to PMA and some other local car parts place and they don't have them, which is annoying as i was hoping to get it today and it would be fixed fairly soonish, rather than wait for delivery. . . . .

But anyway

PLEASE HELP RAZ AND MONTY

Edit:



So ive put a label where the split pipe is in the following photograph. Could you please tell me what product it is on mini spares. My car is 1994 mini cooper 1.3i

This one? Hose 1

Or Hose 2

OR

This one

Hose 3

Do i need a rubber one or silicon ?

Who is going to be kind enough to help a blonde girl and her pride and joy. . . .

Edited by *Raz*, 04 June 2007 - 05:53 PM.

[bristolminimad]

hose 1 i would say but it looks higher up than the bottom hose

[*Raz*]

hose 1 i would say but it looks higher up than the bottom hose

I thought hose one, but wasn't sure.

Do i need the rubber one or silicon one? They are similar price, the silicon one is nicer colour but it wouldnt match the rest of it ahaha

Raz xXx

[rosewhite]

silicone are better but both would work, so get the one you like best

[*Raz*]

silicone are better but both would work, so get the one you like best

Thanks hun

Rx

[Jammy]

Silicon would probably last longer, and I believe they help with heat dissipation a little (not sure on that though). Rubber hose will be fine though for your needs.

I'm not sure exactly which hose you need, I'll move this topic to Injection Specific as the people in there should know!

[*Raz*]

Cool thanks babes, hopefully they know!!

Raz xXx

[[email protected]]

Either GRH1242 or C-GRH1242 will fit