hiya i was wondering if it is possible to use many parts from a sprite and place them on a mini van shell thanks
Mini Sprite To A Mini Van
Started by
1380
, Sep 23 2007 05:07 PM
6 replies to this topic
#1
Posted 23 September 2007 - 05:07 PM
#2
Posted 23 September 2007 - 05:12 PM
Only the front parts and wheels really, engines and front drivetrain is the same, plus front lights etc.
#3
Posted 23 September 2007 - 05:15 PM
also rear sub frame is the same but as the van is longer you will need a longer version of anything that stretches from the front to the rear of the vehicle, such as exhaust, brake lines, wiring loom etc.
#4
Posted 23 September 2007 - 05:32 PM
Think of it like this.
BMC where like students.
They made as many parts fit as many cars as possible as it ment far less time hunting round for that one bolts.
75-80% of part on mini's are common to ALL mini's.
BMC where like students.
They made as many parts fit as many cars as possible as it ment far less time hunting round for that one bolts.
75-80% of part on mini's are common to ALL mini's.
#5
Posted 23 September 2007 - 06:06 PM
except for the panels
#6
Posted 23 September 2007 - 06:43 PM
except for the panels
Thats the other 25-20%
#7
Posted 23 September 2007 - 07:43 PM
And if you also switch over the chassis & number plates that's ringing which is illegal.
Alan....
Alan....
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users