28 replies to this topic

[Juju]

Lets hope it doesn't take too long to get Huey's guts back into him! See ya soon Teapot!

I'm on the home straight on the loom, but it has taken WAY WAY WAY longer than I, or Teapot, would have liked.

Get a move on Jup! I want my Teapot back.............

[Bungle]

have you finished yet ?

its only a mini there aren't that many wires

[Jupitus]

*BUMP*

Come on guys - show your support for Teapot by bumping this and hassling me to finish Huey's loom!

I'm off home from work - I have a parcel waiting from VWP which should contain some Huey goodness!!

[Jupitus]

have you finished yet ?

its only a mini there aren't that many wires

I have a big box at home with about 45 reels of 11 amp in it

[wolfys_mini]

i have only just seen this, made me chuckle.

teapot is taking a break



sorry

[Juju]

Come on guys - show your support for Teapot by bumping this and hassling me to finish Huey's loom!

Get yer f*cking arse in gear, fer f*ck's sake, yer lazy c***. >

That do?

[Bec]

[Bungle]

have you finished yet ?

its only a mini there aren't that many wires

I have a big box at home with about 45 reels of 11 amp in it

i have 2500 meters of cable in my garage

[Silicon Skum]

have you finished yet ?

its only a mini there aren't that many wires

I have a big box at home with about 45 reels of 11 amp in it

i have 2500 meters of cable in my garage

Yeah....but are you sure you *really* need an extension lead THAT long?

Told you to read those descriptions on fleabay more carefully....



SS

[Jupitus]

Come on guys - show your support for Teapot by bumping this and hassling me to finish Huey's loom!

Get yer f*cking arse in gear, fer f*ck's sake, yer lazy c***. >

That do?

Exactement!

Bit disappointed - I forgot that I ordered most stuff from VWP but I had to go to Holden for the switch I wanted for Huey's spots and that is all that arrived today... Instead I've made my super secret loom building board

[Jupitus]

I'm cracking on folks - my lounge and kitchen are covered in wiring stuff, and I'm bumping this to add a link to a tech post:

http://www.theminifo...showtopic=72994

Knowledgable friends of Teapot please assist!

[Jupitus]

A quick BUMP to keep this in focus... Huey's loom is now complete for everything at the rear end, minus earthing loom, and I have decided to change to a bussed fuse box which will be very slick indeed.... keep me motivated folks!!!

[Juju]

When is Teapot coming back?

[Jupitus]

Soon, I hope!

I received a better fusebox for Huey this week with bussed inputs which will be alot neater, along with more connectors, all the switch plug connectors (for the lights etc), more bullets and shiny, but expensive, pro bullet crimper tool. I think I now have everything needed to finish the loom off. The back section of the loom is complete, ie sidelights, number plate light, fuel tank sender, fog lights and indicators and I will be cutting and crimping the front sections this weekend. I'll add in appropriate earthing and then we should be about ready to trim and add in all the dash connectors and switch plugs, leaving wrapping to do... I'll post an update after the weekend!