certainly rust but theres somethign about turbo 4 wheel drives....hmm and swingers! LHD's for a propper one!
How Much Is This Topic Worth?
Started by
mini_mission
, Mar 15 2008 09:10 PM
10076 replies to this topic
#8806
mini93
-
- Members
-
- 8,615 posts
He's just too casual!
- Location: Warwick
- Local Club: Medievil minis of Warwickshire
Posted 22 October 2008 - 06:20 PM
pretty sure lancia delta would have problems too certainly rust but theres somethign about turbo 4 wheel drives....hmm and swingers! LHD's for a propper one!
certainly rust but theres somethign about turbo 4 wheel drives....hmm and swingers! LHD's for a propper one!
#8807
mini93
-
- Members
-
- 8,615 posts
He's just too casual!
- Location: Warwick
- Local Club: Medievil minis of Warwickshire
Posted 22 October 2008 - 06:22 PM
evenin
- OK - how do I make one of the bike gears 1.5mm thinner? the primary output gear that the coupling goes onto.
the gear will be very stong so that rules out lathe really, what about having it precicly ground down? i dont mean with angle grinder
#8808
wolfys_mini
-
- Banned
-
- 2,493 posts
Up Into Fourth
- Local Club: many!
Posted 22 October 2008 - 06:23 PM
i say try it on a lathe.
#8809
roofless
-
- Traders
-
- 7,215 posts
Sticker Pimp
- Local Club: central minis
Posted 22 October 2008 - 06:28 PM
john took it 3 places
no to lathe
no to milling machine
surface grinding appears to be the answer - might have to do it manually with linishing disks and a jig.
no to lathe
no to milling machine
surface grinding appears to be the answer - might have to do it manually with linishing disks and a jig.
#8810
Shifty
-
- Admin
-
- 13,147 posts
Sponsored by Fosters (tm)
- Name: Sean
- Location: Shropshire(sunny)
- Local Club: TMF
Posted 22 October 2008 - 06:31 PM
john took it 3 places
no to lathe
no to milling machine
surface grinding appears to be the answer - might have to do it manually with linishing disks and a jig.
I've got a surface grinder at work!!!
1.5mm is a lot with a surface grinder, best to rough it down with a grinder and then finish with the surface.
Do ya want it done?
#8811
Racer_Pete
-
- TMF+ Member
-
- 2,492 posts
Up Into Fourth
Posted 22 October 2008 - 06:34 PM
Evening Guys!!
#8812
wolfys_mini
-
- Banned
-
- 2,493 posts
Up Into Fourth
- Local Club: many!
Posted 22 October 2008 - 06:38 PM
im bored 
#8813
Shifty
-
- Admin
-
- 13,147 posts
Sponsored by Fosters (tm)
- Name: Sean
- Location: Shropshire(sunny)
- Local Club: TMF
Posted 22 October 2008 - 06:40 PM
I've got the house to myself,Mrs Shifty is off swimming, so its beer and beans on toast for tea!!!
Mmmmmmm
Mmmmmmm
#8814
wolfys_mini
-
- Banned
-
- 2,493 posts
Up Into Fourth
- Local Club: many!
Posted 22 October 2008 - 06:46 PM
no fair!
#8815
Racer_Pete
-
- TMF+ Member
-
- 2,492 posts
Up Into Fourth
Posted 22 October 2008 - 06:56 PM
I'm ffff-freezing!!
#8816
Shifty
-
- Admin
-
- 13,147 posts
Sponsored by Fosters (tm)
- Name: Sean
- Location: Shropshire(sunny)
- Local Club: TMF
Posted 22 October 2008 - 07:01 PM
Nope, me and Harry-dog are nice and warm.
Even better "The Bill" is on.
Life is good!!
Even better "The Bill" is on.
Life is good!!
#8817
roofless
-
- Traders
-
- 7,215 posts
Sticker Pimp
- Local Club: central minis
Posted 22 October 2008 - 07:03 PM
john took it 3 places
no to lathe
no to milling machine
surface grinding appears to be the answer - might have to do it manually with linishing disks and a jig.
I've got a surface grinder at work!!!
1.5mm is a lot with a surface grinder, best to rough it down with a grinder and then finish with the surface.
Do ya want it done?
yes please - can brung it over soon as if you like.
#8818
Shifty
-
- Admin
-
- 13,147 posts
Sponsored by Fosters (tm)
- Name: Sean
- Location: Shropshire(sunny)
- Local Club: TMF
Posted 22 October 2008 - 07:05 PM
Do ya want to pop it in the post to me, when do ya need it for?
#8819
JamesF
-
- TMF+ Member
-
- 228 posts
Mini Mad
Posted 22 October 2008 - 07:08 PM
im bored
If you had that lens you could be busy telling everyone about how you bought it.
You might even be taking pictures with it.That's the way I am.
All the gear and
#8820
Racer_Pete
-
- TMF+ Member
-
- 2,492 posts
Up Into Fourth
Posted 22 October 2008 - 07:08 PM
Cant have heating on, Credit Crunch!!!!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
