R1 powered Mini Cooper
Started by
R1minimagic
, Apr 27 2005 07:35 PM
412 replies to this topic
#46
Posted 15 May 2005 - 06:58 PM
that looks nice mate
#47
Posted 16 May 2005 - 07:08 AM
TA for that. I might copy you I'm afraid. It will be a good base for the rear bulkhead too. No progress yet. Hope to do some this week tho.
#48
Posted 19 May 2005 - 07:14 PM
Quite expensive those square bits of tin they sell you.............about £80 if i remember correctly??
#49
Posted 20 May 2005 - 12:52 PM
Spoke to z-cars. £500 for their bulk head kit! I think I'm gonna make my own. I still need a fuel pump and oil ctch tank too!
#50
Posted 20 May 2005 - 04:28 PM
Yeh that's how much they quoted me for one. I made my own, cost me about £40 for the metal! and i can get mine in and out easier than the zcars one.
#51
Posted 20 May 2005 - 09:34 PM
ooh. let me see. I can get alu sheet real cheap too!
#52
Posted 20 May 2005 - 10:24 PM
In that case Al I might have a favour to ask :cheese:
#53
Posted 21 May 2005 - 10:02 AM
Here is a pic of the modified bulkhead. Initially, it went straight up but now i have put an angle at the top for better clearance behind the seats.
I did buy some polycarbonate to go up to the roof but have now decided to leave it like this. Im not fitting an engine cover, as this way loads of air can get to the carbs and i can show off my shiny bits!!
I will re route the accelator cable when i get some heatproof sleeving. The first one eventually melted from the exhaust heat, even though it is thermo wrapped. I wondered what that burning smell was!!
I did buy some polycarbonate to go up to the roof but have now decided to leave it like this. Im not fitting an engine cover, as this way loads of air can get to the carbs and i can show off my shiny bits!!
I will re route the accelator cable when i get some heatproof sleeving. The first one eventually melted from the exhaust heat, even though it is thermo wrapped. I wondered what that burning smell was!!
#54
Posted 27 May 2005 - 08:55 PM
Just received my new throttle linkage today from zcars. Not fitted it yet as all my fuel pipes etc are in the way, so a little bit of re-plumbing will be required!!
How are you other bike engined guys doing?? Gonna be ready for SCR??
How are you other bike engined guys doing?? Gonna be ready for SCR??
#55
Posted 28 May 2005 - 12:43 AM
scr?
sorting out brake lines at the mo, then will start building front subframe up
sorting out brake lines at the mo, then will start building front subframe up
#56
Posted 28 May 2005 - 08:41 AM
Shakespeare County Raceway!!
Don't be slacking now!!! :gasp:
Don't be slacking now!!! :gasp:
#57
Posted 28 May 2005 - 11:26 AM
ahh yes
#58
Posted 29 May 2005 - 06:50 PM
Alburglar
Will you be ready with your car??
Will you be ready with your car??
#59
Posted 29 May 2005 - 11:54 PM
not at this rate. Might come along in my minus tho.
#60
Posted 31 May 2005 - 10:48 PM
Alburglar, Ade & Pete
Have any of you guys got round to fitting the accelerator linkage yet?? I am really struggling with my new one from z cars, the ratio seems all wrong and not giving anything like full throttle. If yours are like mine you have probably got a busa linkage as Chris says he hasnt made one for an R1 yet!!
Cheers
Have any of you guys got round to fitting the accelerator linkage yet?? I am really struggling with my new one from z cars, the ratio seems all wrong and not giving anything like full throttle. If yours are like mine you have probably got a busa linkage as Chris says he hasnt made one for an R1 yet!!
Cheers
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users