Jump to content


Photo
- - - - -

Cv Boots And Driveshafts


  • Please log in to reply
1 reply to this topic

#1 Adamsm

Adamsm

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 77 posts

Posted 11 May 2008 - 08:21 PM

Here is my little issue, I’ve driven my Minibusa for a total of 50km (It's a wild ride!) and i've already blown both outer cv boots. Is there another cv boot available for our kit? Do the drive shafts come apart with a whack of a hammer or do I need to stretch the cv boot over the shaft? This grease gets everywhere and im not all that happy with it. The back end of the car is as low as it will go for our road conditions. I've read about different engine mounts that lower the power plant about 10mm but im not sure that will do the trick. Any help and or tips are greatly appreciated.

Adam.

#2 Spoonz

Spoonz

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 331 posts
  • Location: Oxfordshire
  • Local Club: TMF

Posted 16 June 2008 - 08:46 AM

TOPIC

topic is already open mate, im stressing out with it too . i have 100% the same problem as you have mentioned.


spoonz




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users