Following a debate / discussion about whether a weber carb is appropriate on a mini and its associated carbs, im curious to see who is on the dark side with a weber 40 or 45.
Add your name to the list guys and girls:
1. Wilson1275
So Who Runs A Weber On Here?
Started by
WiredbyWilson
, May 30 2008 02:27 PM
19 replies to this topic
#1
WiredbyWilson
-
- Traders
-
- 5,004 posts
WiredByWilson
- Location: Kent
- Local Club: WiredByWilson
Posted 30 May 2008 - 02:27 PM
#2
Paul Wiginton
-
- Members
-
- 1,585 posts
Camshaft & Stage Two Head
- Location: at home
Posted 30 May 2008 - 02:56 PM
Me
Paul
Paul
#3
crocks
-
- Members
-
- 316 posts
Porsche slayer!!
- Local Club: none
Posted 30 May 2008 - 06:09 PM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
#4
mini93
-
- Members
-
- 8,615 posts
He's just too casual!
- Location: Warwick
- Local Club: Medievil minis of Warwickshire
Posted 30 May 2008 - 06:11 PM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
#5
The Matt
-
- Admin
-
- 17,232 posts
You don't escape that easily.....
- Name: Matt
- Location: Overton, North Wales
- Local Club: Welsh Border Minis
Posted 30 May 2008 - 06:13 PM
Me, but I'm not sure how relevant this post is unless there's a LOT of specs (including manifold type/length, engine spec etc).
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
#6
rozzer!
-
- TMF+ Member
-
- 2,367 posts
Up Into Fourth
Posted 30 May 2008 - 08:09 PM
i run a 32/36 dgav on mine. mini kel i srunning a 45 on his 1330 rocket!
#7
alexcrosse
-
- Members
-
- 3,786 posts
Up Into Fourth
Posted 30 May 2008 - 08:19 PM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
6. Alexcrosse 45DCOE 5" maniflow manifold
thought we should put type of weber and manifold like matt said
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
6. Alexcrosse 45DCOE 5" maniflow manifold
thought we should put type of weber and manifold like matt said
Edited by alexcrosse, 30 May 2008 - 08:20 PM.
#8
philsford
-
- Noobies
-
- 103 posts
Mini Mad
- Local Club: BMC
Posted 30 May 2008 - 09:43 PM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
6. Alexcrosse 45DCOE 5" maniflow manifold
7. Philsford 45 dellorto on 1380
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
4. Mini93
5. The Matt
6. Alexcrosse 45DCOE 5" maniflow manifold
7. Philsford 45 dellorto on 1380
#9
alexcrosse
-
- Members
-
- 3,786 posts
Up Into Fourth
Posted 31 May 2008 - 05:53 AM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
get a bit more updated =p
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
get a bit more updated =p
#10
The Matt
-
- Admin
-
- 17,232 posts
You don't escape that easily.....
- Name: Matt
- Location: Overton, North Wales
- Local Club: Welsh Border Minis
Posted 31 May 2008 - 06:50 AM
1. Wilson1275
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
2. paul
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
#11
Paul Wiginton
-
- Members
-
- 1,585 posts
Camshaft & Stage Two Head
- Location: at home
Posted 31 May 2008 - 09:55 AM
Ok updating mine...
1. Wilson1275
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
Paul
1. Wilson1275
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93 (weber 40 on 1275 +60 286cam and 90at the wheels)
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
Paul
#12
mini93
-
- Members
-
- 8,615 posts
He's just too casual!
- Location: Warwick
- Local Club: Medievil minis of Warwickshire
Posted 31 May 2008 - 10:01 AM
1. Wilson1275
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
#13
level7
-
- Noobies
-
- 108 posts
Mini Mad
Posted 31 May 2008 - 10:21 AM
Me 1330 riley elf running 40dcoe on 5" manifold (actualy my g,f car 
)
)
#14
rozzer!
-
- TMF+ Member
-
- 2,367 posts
Up Into Fourth
Posted 31 May 2008 - 01:31 PM
1. Wilson1275
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
8. rozzer 28/36 dgav unknown inlet manifold, 1046, sw5 cam, 12g940 head, full lightened and balanced, mirror polished conrods, maniflow phase 1 lcb, 1"3/4 single box centre system. 59bhp, 58lbft torque
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
8. rozzer 28/36 dgav unknown inlet manifold, 1046, sw5 cam, 12g940 head, full lightened and balanced, mirror polished conrods, maniflow phase 1 lcb, 1"3/4 single box centre system. 59bhp, 58lbft torque
#15
mini_kel
-
- Members
-
- 2,851 posts
Up Into Fourth
- Local Club: EMC/No pub mini club
Posted 31 May 2008 - 02:11 PM
1. Wilson1275
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
8. rozzer 28/36 dgav unknown inlet manifold, 1046, sw5 cam, 12g940 head, full lightened and balanced, mirror polished conrods, maniflow phase 1 lcb, 1"3/4 single box centre system. 59bhp, 58lbft torque
9. mini_kel 45 DCOE on 6" oselli manifold 100mm trumpets,1330,286 etc,etc yet to be rolling roaded
2. paul 1380cc, 310 scatter, Swiftune full race head, 45dcoe, 5" Maniflow inlet, etc etc, 155 of Baldwins best
3. crocks (weber 40 on 1380 with 120bhp at crank)
3. mini93: weber 40 on unknown manufacture manifold(not even sure of the lengh but about 6 inch i think) noooice bit bellmouths. 1275 +60. Cyl head ports enlarged and smoothed, standard sized valves. 286 deg cam. pressed welded rockers
5. The Matt (45 DCOE, 38mm chokes, 5" Manifold, 1380cc, KC286 yadder yadder) bhp unknown, torque, unknown sad.gif
6. Alexcrosse 45DCOE on a 1430 105.7bhp @ wheels
7. Philsford 45 dellorto on 1380
8. rozzer 28/36 dgav unknown inlet manifold, 1046, sw5 cam, 12g940 head, full lightened and balanced, mirror polished conrods, maniflow phase 1 lcb, 1"3/4 single box centre system. 59bhp, 58lbft torque
9. mini_kel 45 DCOE on 6" oselli manifold 100mm trumpets,1330,286 etc,etc yet to be rolling roaded
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
