Hey I want to get a tacho for my mini and found a nice one but it goes to 12k :gasp:
A bit too much for the old A-series methinks!
Anyway what I want to know is if I set the switch to 8Cyl, will it the under-read or over read? Any way to deflect it twice as much?
I.e. so that when it shows 12k the engine is actually doing 6k?
Tacho modification?
Started by
Pavel
, Feb 29 2004 07:19 PM
3 replies to this topic
#1
Posted 29 February 2004 - 07:19 PM
#2
Posted 29 February 2004 - 07:32 PM
WHY!!!!
#3
Posted 29 February 2004 - 07:39 PM
Because it looks silly when the tach reads up to 12 and the maximum the needle will ever move is less than half way
#4
Posted 29 February 2004 - 07:42 PM
not really! it'll look sillier that you are trying to trick people into think you'r minis got some formula 1 style ability!, and ticking over at 2/3000 rpm lol!
8cyl will under read im sure, twice as many cylinders, so the cycle takes longer, mini has 4cyl, so 1,3,4,2 then starts again, so i think it wont even move a quarter!
www.speeding.co.uk do the TIM range of gauges, ive just ordered an 80mm in a pod for 39 quid.
Rich
8cyl will under read im sure, twice as many cylinders, so the cycle takes longer, mini has 4cyl, so 1,3,4,2 then starts again, so i think it wont even move a quarter!
www.speeding.co.uk do the TIM range of gauges, ive just ordered an 80mm in a pod for 39 quid.
Rich
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users