Community Status Updates
Anthony30
Look at me being all organised, with my little lists of parts required to finish the mini. :)
Apr 08 2017 08:44 PM
-
Mini-Mad-Craig
back then? :/
Apr 08 2017 08:55 PM -
Vinay-RS
Awesome! How long is the list? :P
Apr 08 2017 09:20 PM -
Anthony30
Not very long TBF. Just a few little bits left, 14 points. I see what you did there MiniMadCraig. :) Take it your still on the forum a lot then?
Apr 08 2017 09:26 PM
This status update has reached the maximum number of replies allowed
Deeppockets
How do I remove the rusty rounded nut holding the servo mount to the bulkhead.
Apr 07 2017 07:40 PM
-
RedRuby
There's also thesehttps://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiu7aS535TTAhWBve0KHcKICXgYABAXGgJkZw&ohost=www.google.co.uk&cid=CAASEuRockDQ02Cw2MxhKwQ-3ixjjg&sig=AOD64_2T3IvBoSP0CvNglHUZIAfpGpaN6g&ctype=5&q=&ved=0ahUKEwjInaK535TTAhWpKsAKHae3BxsQwg8IGw&adurl=
Apr 08 2017 11:25 AM -
Deeppockets
Thanks. I was scratching my head with this. Access to the nut is very limited.
I will be popping down to Screwfix tomorrow.
Apr 08 2017 09:07 PM -
Deeppockets
Fixed! "Successfully removed nut and servo. @RedRuby many thanks for the tip.
Apr 13 2017 07:28 AM
old original
Was really looking forward to fitting some hi-los tomorrow but they haven't turned up yet... Oh what a shame, better stay in the pub, then
Apr 07 2017 07:35 PM
-
ClassicAsh
well its taken me three years to do mini... might do another one next week !
Apr 07 2017 12:52 PM -
Kombi
It's taken me that long not to finish my suspension refresh. Le sigh.
Apr 09 2017 12:44 AM
ClassicAsh
now that the mini is on the road, i have the urge for another project...just need to find something interesting....
Apr 05 2017 05:22 PM
-
FlyingScot
Pickup ;-)
Apr 06 2017 12:27 PM -
ClassicAsh
spoke to soon ! clicking cv joint, kept me busy changing the driveshaft etc. I should know always a job to do with a mini !
Apr 07 2017 12:47 PM
Midas Mk1
Anyone going to the Evo Triangle run on sunday? Can't decide whether to go , or finish engine building!
Apr 05 2017 12:44 PM
-
minifreek1
Will be going to Retrobeutes meet at 3 Sisters on Sunday meself. Not done EVO Triangle for about 2 years...
Apr 05 2017 03:28 PM
-
Vinay-RS
:( It will be worth it if you can get the mini running better by spending a bit on it though.
Apr 04 2017 10:18 AM
-
Itsaminithing
Flat tyre or not it's good to hear you're driving Phil.
Apr 03 2017 09:48 PM -
ukcooper
Humm cant drive over 30mph now funs gone out of it, should be great fully I suppose mind you I am a qualified zombie now lmao
Apr 04 2017 04:40 PM
New game mini
Can anyone recommend a good 'how to' book for mig welding? Ideally for someone who's thick (me)
Apr 03 2017 07:40 PM
-
jonlad
I found lots of helpful 'how to' videos on youtube. Try searching 'how to mig weld' or something similar
Apr 04 2017 11:12 AM -
FlyingScot
You don't need a book, go here http://www.mig-welding.co.uk it tells you all you need
Apr 04 2017 01:10 PM -
New game mini
Looks really good thanks, have also ordered welding for dummies.
Apr 04 2017 11:31 PM
ClassicAsh
The first proper drive out in the mini since restoatation. Now that was fun !
Apr 03 2017 06:27 AM
-
FlyingScot
Nice one - always a good feeling
Apr 03 2017 02:21 PM
-
OhDear
Tells you not to sell it
Apr 03 2017 04:03 PM
rhys-89
Project miffy almost complete hopefully mot later next week just the doors to furnish and dmfew small jobs :)
Apr 02 2017 02:03 PM
M J W J
Spent the day programming an Arduino microprocessor and have finally managed to get it to do what I want. For someone who says 'I don't do electrics, I'm I mechanical engineer' I'm quite proud of myself
Apr 01 2017 11:11 PM
-
RooBoonix
Incredible little devices aren't they, endless possibilities. What have you used yours for?
Apr 02 2017 10:31 PM
