48 replies to this topic

[TheOriginalMiniator]

ive got my minispares ones but they going back as the quality is quite frankly, disgraceful!

will have a nosey at the summerford ones

Mine where Minispares ones. I opened a thread which many may remember, as they were shockingly bad.

I still did my best, and made them fit. W&P's are on the horizon.

i'll have to dig out the thread

cheers, would appreciate that....

mine are so poorly made the rear two arches differ in width by nearly as much as 1.25".

Lucky they were closed on saturday when i discovered the problem!!

[Figs122uk]

Ive tryed loads of times, but the search function sucks. Can someone help me?

If anyone remembers, just as i brought them, i opened a thread, with loads of pictures complaining about the quality.

[TheOriginalMiniator]

agreed on the search function....lol

[Racer_Pete]

Ive got 10x6`s with normal group 2 arches with discs, sailed through MOT but do have a bit of negative camber which bought the wheels in a little, although they still stick out front and rear a little.

[TheOriginalMiniator]

the english MOT system is a joke to be honest, they'd never pass it here if theres even so much as 1mm of tread showing.

Edited by TheOriginalMiniator, 18 October 2009 - 06:10 PM.

[Bungle]

Ive got 10x6`s with normal group 2 arches with discs, sailed through MOT but do have a bit of negative camber which bought the wheels in a little, although they still stick out front and rear a little.

thats because it's not on the MOT list to check

on the other hand VOSA will pick you up on it

[mini.cooper998]

have heard good reports on the huddersfield mini spares arches too

[TheOriginalMiniator]

glad to hear it, ive ordered them a short time ago.

minispares were very decent and are going to give me a full refund.

[leaky]

Heres my mini with drums all round.



Iv got spacers on the back and no spacers on the front so that shows the difference. I do have a disk setup in the garage ready to go on so thats why I never bothered with spacers for the front.

[TheOriginalMiniator]

that a 1" rear spacer mini-jon?

[Figs122uk]

IGNORE

Edited by Figs122uk, 19 October 2009 - 04:00 PM.

[leaky]

I believe it is yes.

[TheOriginalMiniator]

got my huddersfield spares grp 2's roughly fitted last night! i am impressed, brillaint quality and the fit is exceptional outta the box!

highly recommended!

[icemac]

hi everybody,

I'm from Poland - what shop do you recommend ?

I bought wheel rims 6" x 12" and which wide arches to purchase to them?

I want to buy gp2, but wich wide ?? 3" or 3,5 " ?? maybe 2,5" ??
I want that arch didn't stick out behind the wheel rim (wheel reem could stick out maybe 0,5mm )

my wheels are http://www.midlandwh...r-Blue-Rim.html with yoko a539 tyres.

thank's for reply

Edited by icemac, 28 January 2010 - 12:52 PM.

[Bungle]

group 5 or group 2 extra wide