Ram Pipes
#16
Posted 29 March 2010 - 05:54 PM
couldnt find my tape so i used my other method. my finger lol.
thats about 50mm between carb inlet and bonnet lip although the ram pipe may fit under the lip.
so unless i can find an airfilter less than 50mm deep its going to have to be a rampipe with something over it
#17
Posted 29 March 2010 - 06:01 PM
just found this:
https://www.sucarb.c...l.aspx?Id=33255
Edited by minidan, 29 March 2010 - 06:02 PM.
#19
Posted 29 March 2010 - 08:19 PM
http://cgi.ebay.co.u...=item5ad842ddd0
http://cgi.ebay.co.u...=item2a00a194c3
mines the second one but for 99p obv
there's some more about too
#20
Posted 29 March 2010 - 08:26 PM
i havent delt with minispeed for quite some time now, are they still reliable?
Edited by minidan, 29 March 2010 - 08:29 PM.
#21
Posted 29 March 2010 - 09:26 PM
Never use a ram pipe without any filter!
They're supposed to be used with sock fileters, with the hif44 a ram stack which goes inside the cone filter can be used, like this one:
http://www.minispare...p;title=RAMPIPE HIF44 BLUE PIPERC...
(Dont expect power/torque increase by fitting it...)
how does the filter connect to that?
toby
#22
Posted 29 March 2010 - 09:28 PM
#23
Posted 29 March 2010 - 09:29 PM
#24
Posted 29 March 2010 - 09:33 PM
#25
Posted 30 March 2010 - 08:37 AM
#26
Posted 30 March 2010 - 08:48 AM
You're supposed to use ram pipes with a filter.
whoops!
#27
Posted 30 March 2010 - 08:50 AM
http://www.minispare.....20FILTER 1.75
#28
Posted 30 March 2010 - 11:15 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users