256 replies to this topic

[myredmini]

hydro and dry subframes are different, amigo.

Thanks learn something new every day.

[mini-geek]

Throttle pedal? I'm sure they are all the same. Erm no just worked out they're not!

Top dash rail the later ones had two holes in for mounting the trim if you want to be picky!

[Burnard]

Are all windscreens the same??

switched from toughend to laminated.


windscreen locking strips however are the same.

Im pretty sure ALL minis have that hole in the dash rail, no reason for them to change it for one year then change it back?

[midridge2]

early minis did not have a top dash rail ( i presume you mean the pad).
knuckle joints changed with having the spacer washer fitted.
front screens changed from toughned to zebra zone to laminated, inserts were black and some chrome.

[Burnard]

I was talking about the physical panel under neath the pad, im 90% sure that never actually changed.

[Juju]

All minis had the same Weeeeeeeeeeeeeeee! installed regardless of mk, model, edition or factory in which they were fabricated.

[Shifty]

Did the tie bars change?

[[email protected]]

Wheel bearing seals, Radius arm O-rings, rear wheel cylinder bleed nipples, grease nipples and other small sundries were all generally the same across all models.

[Burnard]

steering rack?

[[email protected]]

steering rack?

No, MK1, Mk2 -97 and 97 on were all different

[Timty]

Boot hinges?

[Chris_R]

Jacking points

[Ethel]

Bottom arms seem a good bet, radius arm pins too. Can't think of anything bigger.

How about the component with the most variants? Bags I limited edition decals

[danrock101]

Something makes me want to say headlight rings

[[email protected]]

Something makes me want to say headlight rings

Don't say it, you'd be wrong