Clubman Van Vvc Conversion
Started by
Deanios
, Sep 10 2012 07:18 PM
117 replies to this topic
#91
Posted 10 January 2013 - 08:20 PM
Very cool mate. What gearbox is it running? R65 or PG1? And which speedo are you using? How did you work around the speedo drive and gearing if it's Mini clocks?
We need pictures!
We need pictures!
#92
Posted 11 January 2013 - 07:12 AM
When I was wiring mine, just take each piece an one unit. Follow the diagram and try to stick to the colour coding just in case you need to follow it again later. I have loads of wires left from mine so if you need any, let me know.
With regard to the speedo question, I haven't sorted this on mine yet! It's working but 18% out. I don't know if Dean has got this sorted but it's using the R65 box.
With regard to the speedo question, I haven't sorted this on mine yet! It's working but 18% out. I don't know if Dean has got this sorted but it's using the R65 box.
#93
Posted 14 January 2013 - 08:43 PM
im using the r65 box,
not tried the speedo out yet but i have the cable attatched the the r65 speedo drive and into my standard mini clocks,not sure how it will work but worth a try!
andrew if you have some wires spare i would be very greatful if i could use some as im scratting around for bits off my mgf loom,
pics will follow at some point when i think its in a good looking state!
not tried the speedo out yet but i have the cable attatched the the r65 speedo drive and into my standard mini clocks,not sure how it will work but worth a try!
andrew if you have some wires spare i would be very greatful if i could use some as im scratting around for bits off my mgf loom,
pics will follow at some point when i think its in a good looking state!
#94
Posted 14 January 2013 - 08:48 PM
What wires are you after? Ive got a few left on an mgzs non vvc loom...
#95
Posted 15 January 2013 - 04:09 PM
You know where I am if you need wires. I have a bag full of them! Just ring when you want to collect....
#96
Posted 17 January 2013 - 08:20 PM
cheers andrew,ill be in touch,
not done anything for a bit,
will have to get back into it soon,
not done anything for a bit,
will have to get back into it soon,
#97
Posted 17 January 2013 - 08:29 PM
What do you plan on doing with the immobiliser? Are you going to run a 5as unit as well, or get the ecu decoded?
#98
Posted 21 January 2013 - 05:32 PM
hi
ive run the 5as unit into the loom,i got a matching set so it made life a little easier.
ive run the 5as unit into the loom,i got a matching set so it made life a little easier.
#99
Posted 04 February 2013 - 07:36 PM
anybody know where i can get hold of a 12 volt plug and socket that looks pleasing to the eye for my mini,something like a 7 pin etc,trailer ones dont look very pleasing
i need to be able remove my front end and easily unplug it, maybe panel mount etc????
i need to be able remove my front end and easily unplug it, maybe panel mount etc????
#100
Posted 04 February 2013 - 08:04 PM
try the durite catalogue.
#101
Posted 04 February 2013 - 08:05 PM
http://www.durite.co..._connectors.pdf
page 4 - 6 way superseal might work. depends what your after.
page 4 - 6 way superseal might work. depends what your after.
#102
Posted 04 February 2013 - 08:09 PM
trigger-wheels sell bulkhead plugs
trigger-wheels.com/store/contents/en-uk/d10.html
trigger-wheels.com/store/contents/en-uk/d10.html
#103
Posted 05 February 2013 - 05:15 PM
nice one guys illtake a look
thanks
thanks
#104
Posted 07 February 2013 - 08:34 PM
took delivery of my military style plug and socket for my front end,thanks again guys ive been looking for ages for a decent one
#105
Posted 11 June 2013 - 07:23 PM
Right I'm back,
Started the project again
I'm in need of a standard mini wiring diagram,not the hardest thing to follow but could do with one right now
Any help would be appreciated
Started the project again
I'm in need of a standard mini wiring diagram,not the hardest thing to follow but could do with one right now
Any help would be appreciated
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users