Windage / Baffle Trays Back In Production.
Posted 30 March 2013 - 09:10 AM
I'm already running a lightened, balanced and knife edged crank, so the use of a windage tray would just assist my motor to rev up a bit more freely.
Posted 07 April 2013 - 12:04 PM
Posted 07 April 2013 - 01:37 PM
Latest batch are here.... and with a little bit of patience, provide clearance on both 998 and 1275 rods and the gearbox, but I must say, don't drop one in an expect it to clear first fit you may need to move it around before committing to drilling the holes...
2013-04-07-182.jpg 54.33K 20 downloads
Posted 07 April 2013 - 04:22 PM
Posted 09 April 2013 - 10:37 AM
ps.. Domestic shipping is priced for royal mail 'medium' parcels, as that what my system caters for, however will be sent as a small parcel so expect a refund on shipping costs, just I can't get the system to do it for you.
pps.. Yes will ship worldwide
ppps.. 6 in stock, 40 more in the pipeline.
Edited by Guess-Works.com, 09 April 2013 - 10:40 AM.
Posted 10 April 2013 - 08:18 PM
Posted 10 June 2013 - 02:01 PM
While fitting a tray to a gearbox I had one of those epiphany moments, where you wonder, why didn't I think of that before.
A couple of bends later, the trays now sit a lot lower in the case and hence provide a lot more clearance for the crankshaft.
2013-06-10-272.jpg 31.46K 20 downloads
I have also now finished the fitting guide....
If any who has already purchased one, I can provide a template for the location of the bends, or if you wish return your tray and I'll bend it for you.
Posted 12 June 2013 - 07:15 AM
Wishing I got mine now :-(
I assume you have it fitted now and in the car... ??
If not then as I said above, return it and I'll bend it for you.
Posted 12 June 2013 - 07:30 AM
Posted 12 June 2013 - 07:45 AM
And it all comes down to this question back at you... Did you have to modify the gearbox case for the conrods to clear ?
If not, then there's a good chance it'll clear without modification.
No 2. conrod passes right along the length of the main web in the gearbox, the tray is designed to sit below the arc of this main web.
This can be seen in the fitting guide...
Edited by Guess-Works.com, 12 June 2013 - 07:46 AM.
Posted 20 June 2013 - 07:05 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users