
#16
Posted 14 March 2013 - 11:05 PM
can someone tell me what is the thing that i circle in white ? and what goes in the orange ?
#17
Posted 14 March 2013 - 11:09 PM
And If using a Hall effect Igniter Kit Powersparks/Aldon and so on you remove all suppressors
Edited by KernowCooper, 14 March 2013 - 11:18 PM.
#18
Posted 15 March 2013 - 01:35 AM
Its a old supressor used to stop ignition noise on Radios.CD Players and can be taken off nowdays the radios dont usually suffer that much unless the ignitions system is in a poor state.
And If using a Hall effect Igniter Kit Powersparks/Aldon and so on you remove all suppressors
You need some new -0-0- LOL
it's a insulated female connecter, standard fitment to make sure people don't mix up the coil wires.........
Me thinks Dilligaf needs the -0-0-

#19
Posted 15 March 2013 - 01:40 AM
can someone tell me what is the thing that i circle in white ? and what goes in the orange ?
White circle is a suppressor.
Orange circle is a Lucar insulation boot.
And yes I got it all wrong at first guys, simple thing like this and all 3 of us made a meal out of it

#20
Posted 15 March 2013 - 11:56 AM
Question by OP-can someone tell me what is the thing that i circle in white ? My Reply - Its a old suppressor used to stop ignition noise
Missed out the orange question not because it was difficult but by removing the suppressor I assumed the OP would remove a empty terminal which it looks like the suppressor wire was in at one point. My Apology
Edited by KernowCooper, 15 March 2013 - 12:02 PM.
#21
Posted 15 March 2013 - 01:23 PM
#22
Posted 16 March 2013 - 12:27 AM
And yes I got it all wrong at first guys, simple thing like this and all 3 of us made a meal out of it
Strange seeing as you never said anything first to get wrong, it was your good friend kerrowcooper..........me thinks someone else has 2 log ins........which would explain a lot lmao
As strange as it is to you, I did say something wrong, I got white and orange mixed up, but I was able to remove the text and add the correct information, there is no sinister activity, I don't have two log-ins, KernowCooper is not me or vice versa.
However I can see why you say that Mark, as it probably reads a little confusingly.
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
About To Do A Horrible Job - Wish Me Luck And TipsStarted by floormanager , 01 May 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Idler Gear Bearing Is Correct?Started by JimmyStinkpickle , 28 Apr 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
‘93 Spi Downpipe ReplacementStarted by ShabbyMini , 03 Apr 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
93 Italian Job Wont StartStarted by Mattnumber2 , 28 Mar 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
NewbieStarted by adenton , 23 Mar 2025 ![]() |
|
![]()
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users