1978 saloon. Standard height and on cones. 10 inch wheels dunlop d1s with yoko A008 165/70/10
So, over Christmas I took of my arches and spacers and I have now noticed that she is sitting lower on the rear.
since removing the spacers I have noticed that she has been rubbing on the NS rear when turning to the right .
I have now looked to see if I could see the problem and it is rubbing on where the inner arch meets with the rear valance
I have now quickly done a quick tracking check with a length of string and a rule. I have 6mm toe on the OS and 2mm toe on the NS.
would I be able to set the tracking to 5mm toe on both sides to rectify this or should they be set a 0toe.
Sorry about the rubbish picture
Thanks for any help.