Building up quite collection there. I ended up with three of those not too long ago.
Haha yeah I need a bigger garage
Posted 12 June 2015 - 03:02 PM
Building up quite collection there. I ended up with three of those not too long ago.
Posted 13 June 2015 - 12:23 PM
goodluck
Posted 13 June 2015 - 12:45 PM
goodluck
Posted 13 June 2015 - 02:22 PM
Thanks, I gave up on the 998 turbo, would have been to much effort to build the engine again and this bundle came up for a good price.goodluck
Posted 13 June 2015 - 02:35 PM
The engine was rebuilt and has done 1000miles since I think, it's got +040 omegas in it, that's all I know really.Thanks, I gave up on the 998 turbo, would have been to much effort to build the engine again and this bundle came up for a good price.goodluck
And more power ;)
You know what the internals are like?
Posted 05 February 2018 - 07:06 PM
So an update on this. my brothers van is getting the turbo engine put in. So the new plan is to put a b16 honda engine in it, trying to stay with the fixed round nose, using an allspeed frame.
Posted 05 February 2018 - 07:07 PM
Posted 05 February 2018 - 07:21 PM
Posted 06 February 2018 - 10:09 AM
I see you've got the heavy object mover's friend, the old skateboard, tucked under the bench there - use my son's old one far more than he ever did!
Posted 09 December 2019 - 03:12 PM
So over winter the plan for this is to completely restore it, making it into a track/fast road car:
Sticking this in it:
Untitled by Bryn Kinsman, on Flickr
Untitled by Bryn Kinsman, on Flickr
Posted 15 April 2020 - 07:03 PM
Little update
Recycled my old bed frame and made the rough frame to transport the sub frame and gearbox around. just waiting for the wheels:
Untitled by Bryn Kinsman, on Flickr
Got the first layer of carbon down on the main dash mould, not the best in the corners but as long as it does the job i'm not too fussed on looks, still need to made up a mould for the digi dash to fit on, need to get a digi dash first, any recommendations?
Untitled by Bryn Kinsman, on Flickr
Also got some metal supplied to make up my roll over jig and some bracing so i can change the floor, also got some tube to make up some sill stands, great service from Booth and Son:
Untitled by Bryn Kinsman, on Flickr
Posted 20 April 2020 - 07:44 PM
Popped the carbon dash out of the mould:
Untitled by Bryn Kinsman, on Flickr
Untitled by Bryn Kinsman, on Flickr
Got the engine on the new trolley:
Untitled by Bryn Kinsman, on Flickr
Untitled by Bryn Kinsman, on Flickr
Made the end pieces for the roll over jig:
Untitled by Bryn Kinsman, on Flickr
0 members, 0 guests, 0 anonymous users