189 replies to this topic

[MiniElliott]

Maybe do a search on here. Im sure someone else will have will have had a similar problem on here

Edited by MiniElliott, 25 March 2014 - 12:13 AM.

[BronkoMini]

Maybe do a search on here. Im sure someone else will have will have had a similar problem on here

Thanks, will do

[GreaseMonkey]

Moss Europe sell them for around £8-10. Have you tried having someone sit in the car and hold the brake on while you try and undo it?

[BronkoMini]

Moss Europe sell them for around £8-10. Have you tried having someone sit in the car and hold the brake on while you try and undo it?

yes tried that, my dads picking up a impact gun later,  and I cant seem to find one on there

[megamini_jb]

I bought mine from these - http://www.ebay.co.u...11884384&_rdc=1

[BronkoMini]

I bought mine from these - http://www.ebay.co.u...11884384&_rdc=1

Thanks do you think using a 34mm would just round it of?

[BronkoMini]

Just placed an order for new arches and parts, and a castle nut and washer so if I do round it of I can cut it of then put the new one on,  sorry mini spares it was with mini sport.

[BronkoMini]

Braided line now on both sides rear and driver side front, front one looks linked but is not, going out now to get the impact gun.

[BronkoMini]

Every thing is going wrong now both my compressors valves have split so I can't use my new impact wrench

[megamini_jb]

Jeez this mini is a curse

[BronkoMini]

Jeez this mini is a curse

Yeah tell me about it, got an idea I will try tomorrow, I recon he doesn't like being parked at the farm because it smells so he is trying to make it so I can't go, minis have feelings you know

[BronkoMini]

Got the hub but of, in the end I used a dremmle cut down as far as I could both sides with out hitting the thread then got, a chisel in the gap and gave it a few (taps) :) and them it spilt of, now I have to wait for mini sport to get my parcel to me so I can pug the new one one, to get this of it's only cost about £80.

[BronkoMini]

Can anybody give any hints on how I get the passanger side hose of it's not the same as the driver side?

[BronkoMini]

The nut bit at the end of the pipe is completely rounded of, I have looked and many people have just cut it of can I do that then get a replacement nut bit at the end of the pipe which goes in to the top of the braided bit ? Would it just slot over the pipe? Thanks

[BronkoMini]

First drive since the work