I think for what they did the money charged was far to much, you could have gone some where who had a CO meter and put a standard needle in (£5) and set the CO, 10mins.

#31
Posted 12 May 2014 - 08:11 PM
#32
Posted 12 May 2014 - 08:29 PM
I think for what they did the money charged was far to much, you could have gone some where who had a CO meter and put a standard needle in (£5) and set the CO, 10mins.
well to be honest im thinking that the standard needle made a bit richer might be a better outcome!
#33
Posted 14 May 2014 - 04:53 AM
Thats shoddy work anyone who sets the mixture before checking the timing is not worth the time to drive there, for all they knew your car could have been 8degs retarded. Mixture and timing would be set and adjusted on the setup. Your being kind saying there a good garage, they obviously know nothing about classics, or even worked on the earlier stuff pre ecu.
Its going to be difficult for you to get it sorted, how far are you away from AC Dodd in the west country? worth a trip maybe
pardon my french but what kind of idiot tunes the carb without tuning the timing first.. seems a bit silly and completely agree with Kernow.. not worth the trip.. you should try and find a mechanic that knows classics and has the patience to work on it.. :)
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
About To Do A Horrible Job - Wish Me Luck And TipsStarted by floormanager , 01 May 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Idler Gear Bearing Is Correct?Started by JimmyStinkpickle , 28 Apr 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
‘93 Spi Downpipe ReplacementStarted by ShabbyMini , 03 Apr 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
93 Italian Job Wont StartStarted by Mattnumber2 , 28 Mar 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
NewbieStarted by adenton , 23 Mar 2025 ![]() |
|
![]()
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users