#91
Posted 12 September 2021 - 07:37 PM
Will you have it ready for next spring?
#92
Posted 12 September 2021 - 10:29 PM
#94
Posted 28 October 2021 - 11:30 AM
Exciting news to come on this project - watch out for an update on November 10 :)
#95
Posted 28 October 2021 - 07:37 PM
Can't wait that long lolExciting news to come on this project - watch out for an update on November 10 :)
#96
Posted 31 October 2021 - 10:57 AM
Hi folks,
I've managed to lose the spring that attaches to the seat tilt rod mechanism. Does anyone know if they can be bought anywhere, or have one knocking about that they'd sell? Edit: measured up and bought a generic one which will hopefully do the trick.
Thanks
Edited by StuM, 31 October 2021 - 12:27 PM.
#97
Posted 11 November 2021 - 08:47 PM
So, I bought the Clubby as a project 7+ years ago. "It won't be one of those projects that sits in the garage unfinished". Well, it was - and I got to the point of being gutted to not get it done and feeling frustrated every time I went in the garage. So, I decided it was time to get some help. So, yesterday I hired a (massive!) trailer and took her down to ML Motorsports for them to work their magic and help me get it on the road.
#98
Posted 11 November 2021 - 09:10 PM
#99
Posted 11 November 2021 - 10:10 PM
#100
Posted 26 November 2021 - 06:58 PM
Time for an update.. ML Motorsports have been making amazing progress on the Clubby and it is edging closer to being back on the road.
Windscreen is in and parts starting to go back on. I had to buy another front loom as the one I bought (on advice) was for an early Clubman and mine is a bit of a cross-over year. So, bought the right one which is now in
Brake and fuel lines run - all looking nice and clean underneath
Rear bumper in place
Front bumper and lights..
And the most exciting update so far for me - for the first time in 9 years, the engine is back in the car :). New master cylinders fitted.
Properly excited about this now.
Edited by StuM, 26 November 2021 - 07:35 PM.
#101
Posted 27 November 2021 - 08:10 AM
Looking great - nice colour.
Needs a proper clubman rear bumper though.
#102
Posted 27 November 2021 - 09:22 AM
Looking great - nice colour.
Needs a proper clubman rear bumper though.
And you can buy these new now, right? I think MiniSpares is reproducing them?
#103
Posted 27 November 2021 - 10:50 AM
The rear has always been a little easier to get as it was used on a few special editions (front and rear).
#104
Posted 27 November 2021 - 03:33 PM
What's the colour Tweed Grey ? mines Audi Nardo Grey very similar flat grey, a very on point colour at the moment. Looking forward to watching your build progress good luck.
#105
Posted 27 November 2021 - 11:30 PM
Yes, Tweed Grey with Old English White roof.
The original Clubman bumper was badly mangled so this was a good, used non Clubby one just to get it on the road. Will check out options.
Engine due to be started soon (for first time since 2011) so keeping everything crossed at the moment!
Also tagged with one or more of these keywords: clubman
Projects →
Mini Saloons →
Cape Town 🇿🇦 1275HleStarted by JAYO , 28 Feb 2021 clubman |
|
|
||
Projects →
Mini Saloons →
Budget Mini Clubman Shell Restoration For £1500Started by minimissions , 13 Nov 2019 clubman |
|
|
||
Projects →
Mini Saloons →
1275Gt Tarmac Rally Car - From ScratchStarted by KRM_Simon , 26 May 2019 clubman |
|
|
||
Projects →
Mini Saloons →
1275Gt Resto - From Flip To FactoryStarted by Verderad , 12 Mar 2018 clubman |
|
|
||
Projects →
Mini Saloons →
1977 Leyland Mini - 1275Started by parrellan , 27 Oct 2017 clubman |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users