223 replies to this topic

[jackjewelljj]

No waste of time will peel off in 5min its an alloy block

[thelegg]

Even if you use proper paint ?

[jackjewelljj]

Its such a tight fit won't be able to see much of it as well so my opinion is its a waste of time

[thelegg]

Lol but when you've got your front end removed at showes how are you going to win show n shine with a dirty engine ;)

[jackjewelljj]

Not going to bother with shows to much effort lol

[jackjewelljj]

Mounted the front coil overs today, started to strip the dash to replace the wood and recover with leather

Attached Files

•  WP_20151231_19_06_32_Pro.jpg   31.32K   193 downloads

[Broomer]

Your steering is not going to work properly with that setup.

[jackjewelljj]

******* ;)

[Broomer]

On a serious note, is there enough thread protrusion on that top mount ?

[jackjewelljj]

On the ball joint? That's how all the other ones are that I've seen

[Broomer]

Top mount of the coil over.

[jackjewelljj]

Dunno nearly sits flush with the nut

[Broomer]

That's all groovy then, just about.
When you painting it then.

[jackjewelljj]

The coil over I'm not.

[Broomer]

Ffs.