Hi, I'm currently trying to rebuild my master cylinder (yellow tag) and for the life of me I cannot get the reservoir off to remove the rest of the assembly. It's held in with a roll pin at the top, but I can't get a good angle to knock it out because the reservoir is in the way... Any ideas?
No replies to this topic
#1
CG1098
-
- Noobies
-
- 11 posts
Learner Driver
- Location: Greater Manchester
Posted 06 February 2018 - 07:40 AM
Also tagged with one or more of these keywords: brakes
Mini Technical Sections →
Problems, Questions and Technical →
Adjusting Brake Bias For 7.5" Discs With Pdwa ValveStarted by Daniel Watkin , 16 Nov 2023  brakes
|
|
|
||
 Answered
Mini Technical Sections →
Problems, Questions and Technical →
Fam7821 Brake Limiter Valve - Mounted Upside Down?Started by tarnofsky , 29 Sep 2023 brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Kent 286 Can & MotStarted by frosty90 , 07 Sep 2023 brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Brake Master Cylinder ReplacementStarted by M I N I , 30 Aug 2023 brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Fitting 10” Wheels On My Mini Convertible (Spi)Started by Dalla , 29 May 2023 suspension, brakes
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
