18 replies to this topic

[Spider]

All you need is for the Oil Light to go out before you start it that first time.

[coopertaz]

crank over without plugs in and you should see oil at the rocker shaft then you know it is primed before starting after rebuild

[TheRedBullet]

Okay I tried priming the pump and used the switch only and the orange oil light fades out when cranking, now I will attempt to start it and hope for the gauge to start reading pressure as its not moving a bit when cranking only with the gauge connected.

[TheRedBullet]

Problem solved, After connecting a booster to my battery and changing the kinked oil gauge pipe I managed to get 80 psi and no orange oil light on the dash. thank you guys for helping me.