Jump to content


Photo

coil springs


  • Please log in to reply
41 replies to this topic

#31 kiBBle!

kiBBle!

    Starting My Mini Up

  • Noobies
  • Pip
  • 2 posts
  • Local Club: bury mini club

Posted 04 January 2009 - 04:42 PM

this propbly isn't relavent to this topic, but my rear subfram is knackerd, and i am tempted to put a beam kit on the rear, and put coil over kit on the front, with the coilovers on the front will i still need rubber cones on the front subframe?

#32 BoboGib

BoboGib

    RoboGimp

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,579 posts
  • Local Club: SMAC

Posted 04 January 2009 - 04:44 PM

nope, the coilovers have springs on them so the coil over kit completely replaces the need for the rubber cones.

#33 kiBBle!

kiBBle!

    Starting My Mini Up

  • Noobies
  • Pip
  • 2 posts
  • Local Club: bury mini club

Posted 04 January 2009 - 04:57 PM

nope, the coilovers have springs on them so the coil over kit completely replaces the need for the rubber cones.


do you know anything about the rear beam idea?

#34 BoboGib

BoboGib

    RoboGimp

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,579 posts
  • Local Club: SMAC

Posted 04 January 2009 - 04:59 PM

nope, the coilovers have springs on them so the coil over kit completely replaces the need for the rubber cones.


do you know anything about the rear beam idea?



sorry mate but no, i've never seen or touched one, I think someone else on here is doing one at the minute tho.

#35 kiBBle!

kiBBle!

    Starting My Mini Up

  • Noobies
  • Pip
  • 2 posts
  • Local Club: bury mini club

Posted 04 January 2009 - 05:03 PM

nope, the coilovers have springs on them so the coil over kit completely replaces the need for the rubber cones.


do you know anything about the rear beam idea?



sorry mate but no, i've never seen or touched one, I think someone else on here is doing one at the minute tho.


o ryt kool, im new to the forum, so dnt know many people on here, i plan on making mine track ready, so the coilovers would be a good idea i think, i was thinking of this 1 http://www.minispare...d...2&prod_id=2

#36 Massey

Massey

    Mini Mad

  • Members
  • PipPipPipPip
  • 272 posts
  • Local Club: N/A (but looking for one)

Posted 27 January 2009 - 05:30 PM

I have looked though this post you all talk about the hi lows i have some my self havent fitted them yet as not sure how any one help me out where shall i look ???

thanks Dan

#37 somecrapname

somecrapname

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 371 posts
  • Location: Preston

Posted 26 July 2009 - 06:55 PM

I know this is an old topic, but thought I'd necro this rather than start another on the same subject. keeps things together. so anyway:

I'm looking at getting these coil spring conversions too (conversion, not over), but can't decide between the different ones available. It's for standard (fast;) road use, so already discounting the 'race/competition' types, there are still a few variants from stores.

Does anyone have experience with the various types, or can explain why some cost considerably more than others? mini-spares. for example are £261 but Huddersfield and plminishop are only around £150 (not inc hi-los). and not all mention whether they include the conversion plates or not.

I think I'm going to pick up the standard (black) ones from Huddersfield, decent price and they say they include the plates, too.

#38 minivanman

minivanman

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 3,454 posts
  • Local Club: Backstreet Minis

Posted 27 July 2009 - 04:22 PM

I have the fast road minitastic setup. Its probably more expensive than most, but I'm really not bothered - its not something I'd trust huddersfield's own brand cheapy stuff with!

#39 PaulF

PaulF

    Mini Mad

  • TMF+ Member
  • PipPipPipPip
  • 158 posts
  • Local Club: HAMOC

Posted 27 July 2009 - 07:01 PM

i got the fast road springs from minitastic been on the car for nearly 9,000 miles and had no troubles. i suppose you get what u pay for

#40 somecrapname

somecrapname

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 371 posts
  • Location: Preston

Posted 27 July 2009 - 07:53 PM

i got the fast road springs from minitastic been on the car for nearly 9,000 miles and had no troubles. i suppose you get what u pay for



the minitastic's aren't really much more than the plminishop and huddersfield's 'cheapy' springs, if their page can be deciphered correctly.

If you buy the 'fast road 4 coil springs only £188.00' will they fit with standard hi-los (I already have Mini Sport's Adjusta Ride set up), I assume that's what is meant by height adjuster, but why are they machined differently and the coils not just made to fit the standard equipment? this image also shows a polyethylene Insulator, are these included and what is is for?

the site also seems a bit... dated, are they reliable?

#41 PaulF

PaulF

    Mini Mad

  • TMF+ Member
  • PipPipPipPip
  • 158 posts
  • Local Club: HAMOC

Posted 28 July 2009 - 06:19 PM

the plastic ring goes on the spirng and sits in the groove on the rear subframe so it sits in the right place you dont get any for the front as theyre not needed. the hilos are apprently machined to fit so i dont know if standard hilos fit. ring them up and ask for some info if you need i think they have a demo car aswell that you can go out in

#42 Bean

Bean

    Queen of 'shoppin, Voted Miss TMF 2011

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 8,054 posts
  • Name: Jean
  • Location: Malvern

Posted 09 August 2009 - 09:07 PM

the site also seems a bit... dated, are they reliable?




Very! ;)

He's a great guy! We nipped down to see him a few months ago and I drove the demonstrator. (A very nice Japanese automatic). The ride is just unbelievable! So smooth!

He's recently moved the business, so was quite difficult to get hold of a little while ago, but the phone number is the correct one.


I bought the fast road kit and the height adjusters. The insulators are included, yeah. :D You also get a full fitting-guide with instructions and photos of how it all goes together.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users