Hello, I have a 95 fuel injected mini, and the o2 sensor has a Wire coming through the floor pan as you'd expect. But then it ends and I can't find the two wires (red and white) wires that have been severed from it. In other words I can't find the routing for where the wire is meant to go.
I'm assuming it goes to the ECU but I don't know which pin goes to that circuit. So if anyone would happen to know what pins in the ECU go to the 02 sensor that would also be handy, so I can connect them with a new wire.
1 reply to this topic
Also tagged with one or more of these keywords: electrical
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Mini Spi Charging IssueStarted by Dutch_MiniSPI , 27 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Main Dipped Beam Not Working - Just Before Mot :-(Started by Park , 24 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Speeduino EcuStarted by cooperpooper , 09 Mar 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Smiths Electronic Speedo Accuracy?Started by chuee , 01 Mar 2024 electrical |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users