Hi everyone, alternator issue to ask about,
Its an old 70amp one, Ive had a alternator warning light on, and now its not charging when the headlamps are on. The belt is tight within the haynes guidance
My question is, is it worth trying to refurbish brushes (or any other component?), or, considering I have no experience working with alternators, and a new one is ~£50, am I better off just replacing it (its at least 10 years old by now)
Thanks in advance, Pete
5 replies to this topic
#1
Posted 25 August 2018 - 06:32 PM
#2
Posted 25 August 2018 - 06:44 PM
To be honest I’d replace it. By the time you’ve factored into reaping it, any bits you need and the fact it might not work. It’s usually better to replace it. £50 isn’t the end of the world.
#3
Posted 25 August 2018 - 06:58 PM
When you have fitted the new one, carefully take the old one apart.
If nothing else, in a competition, an alternator with half its guts on the bench, leaves that little bit more power to churn the cogs.
#4
Posted 25 August 2018 - 08:09 PM
To be honest I’d replace it. By the time you’ve factored into reaping it, any bits you need and the fact it might not work. It’s usually better to replace it. £50 isn’t the end of the world.
#5
Posted 25 August 2018 - 08:11 PM
That was my thought Alex, just gauging opinions of those who've done it, before I commit my cash!
If it is a simple job Id rather have a crack at it, not entirely sure what I'm doing though ?
If it is a simple job Id rather have a crack at it, not entirely sure what I'm doing though ?
#6
Posted 25 August 2018 - 08:21 PM
Gold Lion Auto Electrics on Ebay will supply you with new brushes, rectifier and bearings for @ £15 and it's straightforward to fit the parts
Also tagged with one or more of these keywords: electrical
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Mini Spi Charging IssueStarted by Dutch_MiniSPI , 27 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Main Dipped Beam Not Working - Just Before Mot :-(Started by Park , 24 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Speeduino EcuStarted by cooperpooper , 09 Mar 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Smiths Electronic Speedo Accuracy?Started by chuee , 01 Mar 2024 electrical |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users