#1
Posted 22 June 2021 - 05:20 PM
A local engine machine shop changed them for me and the cam can only be turned by a spanner which they thought was OK. I don't accept this. The cam should turn freely by hand.
Kind regards
Rob
#2
Posted 22 June 2021 - 07:51 PM
Phil.
#3
Posted 22 June 2021 - 08:02 PM
It all depends on which bearings you were supplied with.
some suppliers sell originals that need scraping to fit.
others supply ones that are on size when fitted.
as Phill says yours need cramping to fit.
#4
Posted 22 June 2021 - 08:20 PM
Sorry, I'm not local and can't help with your request here, however;-
,,,,,, changed them for me and the cam can only be turned by a spanner which they thought was OK. I don't accept this. The cam should turn freely by hand.
I gotta wonder what machine shop would think this is OK - regardless of the type of bearings fitted. Running clearance here should be 0.001 to 0.002".
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Tapping Noise At IdleStarted by Sterling M , 27 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , 18 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users