65 replies to this topic

[Engine_tuner]

Might be of interest to some people?

1275cc A+ block decked by .320 thou, using a genuine 970 'S' crank and 1275 'S' rods, minispares mega pistons, S/C gears all through, Morspeed alloy flywheel.
Fitted with a 16v twincam BMW K1100 head and 320 duration cams.

2 x 40DCOE carbs, Aldon ARP100 dizzy and a 1" plate inlet manifold.

Built for a customer racing in a 'anything go's' 1000cc class.

[Big_Adam]

It's one way to use a large sum of money.

[Marky Tizz]

Looks wicked. No in car shots?

[biggav]

O


My



GAWD!!!!!!!!!


I want one NOW!!!!!!!
What would it do with giggle gas??

[Elfie]

After watching that one of the 'other things to watch' things was how to rip a phone book in half, so I'm gonna try that now!
But very impressive engine, was the numbers in the middle of the laptop screen the speed?

[biggav]

BHP ??????

[JetBLICK]

132bhp@9200rpm.... thats my guess

Seeeeeee... now thats why short strokers are the way forward!!!!

[Marky Tizz]

9200RPM!?!?! BLAAAAHDY HELL!!!
motorbike anyone?!

[Engine_tuner]

numbers in the top middle of the laptop are BHP then underneath RPM.

[Engine_tuner]

Morspeed will be inviting 10 people to come and watch the setting up and dyno run of the next Twincam 16v which is a customers 1380cc Ultimate road engine,
This will be within the next week or 2.

I will post details near to the time.

[nmt_oli]

That looks very very tasty! and has certainly tempted me towards saving up for 16v. so much so ive sent you an email!

[Sprocket]

I will say no more on this other than that it is an 8valver and NOT a 16valver.

[JetBLICK]

I will say no more on this other than that it is an 8valver and NOT a 16valver.

Is that despite the fact that the video description says its a 16v?

Edited by JetBLICK, 26 April 2007 - 09:53 PM.

[Jammy]

I'll put a tenner down that Mini Sprocket posts again on this topic!

[scottyegg]

and its got 2 over head cams with 8 valves per cam x 2 is 16?