Community Status Updates
MINI WILL
Hi guys I’ve seen a 1979 mini clubman that I might buy on eBay but its missing the commission number plate (the red one) that should be on the slam panel is this important as the seller does not have it. Any help will be great thanks =)
Mar 25 2016 10:44 AM
-
MrBounce
That car's certainly been changed a bit from standard - early 80s Mayfair interior, late Cooper wheels (possibly brakes too) and an 80s Metro lump. I am not convinced that that colour was a '79 shade either (could've been resprayed). If it's originality you want, then it's not the car for you! As stated above though, the missing tag could just be something that's gone missing over the years. It's worth a look as you're not too far away - if there's anyt...
Mar 25 2016 04:54 PM -
MrBounce
...anything you're not sure about, walk away. It does look a bit expensive for what it is though.
Mar 25 2016 04:56 PM -
MINI WILL
Thanks I went and had a quick look and it’s got rust in nearly all of the panels - around the roof in the rear quarters by the radius arms, bonnet, A panel, boot hinge panel, so the search will go on thanks for your help much appreciated
Mar 25 2016 08:58 PM
Midas Mk1
Looking at getting my spare MPi block rebored, new cam bearings, and worked crank. Who would be suggest that would do it in a reasonable lead time, and not cost the earth?
Mar 24 2016 03:38 PM
-
Fast Ivan
Ac Dodd for the block work, around 130 for next size up, and cam bearings, he'll need your pistons. He can also get your crank ground but longer lead time
Mar 24 2016 05:47 PM
-
Fast Ivan
8.4" but the parts I have are the same for both, you need some other stuff for drums.
Mar 24 2016 05:24 PM -
Woody6891
Used or new, and how much?
Mar 24 2016 05:29 PM -
Fast Ivan
I've got it up for sale in the for sale section, New AP calipers, New flanges, used cv joints
Mar 24 2016 05:40 PM
pusb
Wish now I had ordered a new loom before taking the old one out. 10 week wait for new one to be made is frustrating!
Mar 23 2016 09:42 PM
-
Fast Ivan
And if you need 7.5" brakes I have them to go with the wheels :)
Mar 23 2016 04:53 PM
Klevdo2202
Mini-skirts were in style when she danced down the aisle Back in '63 (yeah, yeah, yeah, yeah) But it's hard to get by when your arse is the size Of a small country
Mar 23 2016 10:07 AM
-
cubby1701
Bare naked ladies??????
Mar 23 2016 03:24 PM -
GT Jimmy
Divine comedy, great lyrics
Mar 23 2016 09:57 PM -
Gerbil367
Take the National Express when your Mini's a mess............ haha ok, should be life not Mini!!!
Mar 24 2016 12:50 PM
Pingu
With IMM just around the corner, my heart goes out to all those who have lost their life's today in Belgium. Always stay safe.
Mar 22 2016 03:40 PM
-
Stevie W
Wise words Pingu....a terrible day indeed x
Mar 22 2016 06:36 PM
rhys-89
can't believe how fast time goes another birthday has come round :( CAKE mmmmm :)
Mar 21 2016 11:57 PM
-
Pingu
Happy Birthday! Time flys when your having fun.
Mar 22 2016 03:00 PM -
MrBounce
Ha ha! It's my birthday today! I have ribeye steak for tonight om nom nom nom
Mar 23 2016 02:36 PM -
rhys-89
Happy birthday ! Mmmmm steak
Mar 23 2016 05:42 PM
oliver122
Can anyone tell me how far the rear lip sticks out that the bumper bolts to , mines rotted off and ive got non gen panels and need to figure out where cut them
Mar 21 2016 07:37 PM
M J W J
Spent the day at Tyldesley Model Flying club taking part in 3 competitions. I had to drop eggs from my plane, fly under a wire as many times in 2 minutes and then a competition called 'roops' Didn't win but didn't come last in anything.
Mar 20 2016 07:14 PM
-
minifreek1
I know TMFC, never been but know where it is you fly from... Iv still got a few models meself from when I used to fly, and about 30 engines too, not been run for a couple of years... I used to mainly fly control line, never really got into RC aircraft...
Mar 21 2016 06:41 PM -
M J W J
I'm not a member of the club. I went to an open day there. I'm a member of the Newport DMFC in Shropshire.
Mar 21 2016 08:48 PM -
minifreek1
Oh thought you was a local lad to me in Wigan....
Mar 22 2016 10:01 AM


This status update has reached the maximum number of replies allowed

