Community Status Updates
MRA
Has anyone seen my polished rear bearing caps ? it's in my AVATAR, available since 2011 from the best outlet in Mini Spares (Mini Spares Centre London)
Mar 05 2016 08:26 PM
This status update has reached the maximum number of replies allowed
MRA
Looking for an industruial unit inand around the kettering and wellingborough area anyone know of any about 16oo to 3000 feet
Mar 05 2016 05:42 PM
-
Steve220
What are you intending to provide in terms of services? You'll only be down the road in Kettering.
Mar 05 2016 05:47 PM
misspixiep
I have 4.5x12" mini 30 RSP wheels on my 1989 car, what would have come on it origionaly if these weren't them? and what could I replace them with?
Mar 05 2016 11:32 AM
-
Anthony30
5J is perfect for 'special arches', with 165/60R12 tyres. :)
Mar 05 2016 05:17 PM -
misspixiep
Thank you Anthony30 x
Mar 05 2016 05:26 PM -
Anthony30
You can still fit the wider 165/60r12 tyres on 4.5J wheels though, you don't need the extra wheel width, but fits the arches much better. I would recommend yoko A539 165/60r12 tyres based on good reviews.
Mar 05 2016 05:36 PM
inim_repooc
Nick Swift is mad, but fantastic! https://www.youtube.com/watch?v=W97N-MNenj4
Mar 04 2016 11:03 PM
pusb
What stage 1 kit would you fit to a 1100 engine, but with a 1275 head? Should it be a 1275 kit, or a 998/1098 kit?
Mar 04 2016 08:40 PM
jameseddolls
Wonder if the mini is going to start tomorrow. Hasnt been started for nearly 4 weeks. I know its not very long compared to some you see locked away for years, but my mini has been frustrating to me. Especially as i havent got any mechanical experience, which will change this year for sure.
Mar 04 2016 03:14 PM
misspixiep
My babies poorly ��... been driving her daily with no problems, then today been to pick a friend up, went to start her up and nothing! No turnover or anything...
Mar 03 2016 08:30 PM
-
misspixiep
she's at the Auto Electricians, I'm sure they'll find it x
Mar 04 2016 11:00 AM -
Gerbil367
Its just how much they will charge tho :-(
Mar 04 2016 01:20 PM -
misspixiep
I've got her home :-).. she's lights up like she's supposed to do, new halogen headlamps even the interior light works :-) and to top it all off...I HAVE HEAT whoop whoop..
But he did say that she's not sounding quite right. She's popping when revved up.
He then asked when I want a alarm or immobiliser putting on her!
It cost me £144 Inc. parts, labour & tax
I'm very pleased that she's home and better....
Mar 05 2016 12:29 AM
KernowCooper
that I woke up this morning lol no went to reply to MRA status and ended up posting a ststus for me ?
Mar 03 2016 07:36 PM
-
Spider
I thought that last one was a bit cryptic!
Mar 03 2016 08:08 PM
inim_repooc
Whilst theroy suggests that the optimal exhaust for a mini will be around 1.75 diameter and have the same size final exit, how much difference would be seen in reality with a 2.25 exit on an otherwise 1.75 system?
Mar 03 2016 01:11 AM
-
Steve220
Tailpipe is merely a cosmetic commodity. The major factor is that you have 1.75" ID which most mini exhausts aren't, they're 1.75 OD making the ID around 1.6".
Mar 03 2016 08:58 AM -
inim_repooc
Do you know the ID of the RC40's?
Mar 03 2016 11:57 PM -
timmy850
I think the 1.75"OD is 1.625"ID. When you have a small pipe going to a big pipe, it slows and cools the exhaust faster, which can reduce performance.
http://www.minispares.com/article/Technical~Information/Exhaust/Exhausts~-~Basic~information.aspx?ids=6|22|1049&perma=exhausts-basic-information
http://www.minispares.com/article/Technical~Information/Exhaust/Exhausts~-~Sizing~and~styles.aspx?ids=6|22|1053&perma=exhausts-sizing-and-styles
Mar 04 2016 04:31 AM
-
Fast Ivan
what is?
Mar 03 2016 08:11 AM
