Type R Mini Van
#31
Posted 24 September 2009 - 09:00 PM
u r one jammy bugger, wanting one of these when im older
#32
Posted 25 September 2009 - 10:48 PM
Real jelous, but the only way I could afford a z cars project, would be to sell the Cooper, but I've owned it for 20 years so can't quite bring myself to do it!
all the best
john
#33
Posted 27 September 2009 - 11:24 AM
#34
Posted 29 September 2009 - 02:27 PM
fuel tanks mounted
radiators mounted
gear stick and gear cables are in
2x top mounts to stop the rear of the shell moving around are tacked in place
exhaust is on ( tail pipe needs extending when it eventually goes to zcars )
reverse flip front is mounted.
DSC04150.JPG 842.77K 233 downloads
DSC04163.JPG 827.96K 240 downloads
DSC04162.JPG 894.54K 298 downloads
DSC04158.JPG 807.09K 107 downloads
DSC04166.JPG 765.11K 83 downloads
DSC04161.JPG 902.99K 304 downloads
The next things in the to-do list are:
finish the flip front ( catches , panel gaps etc )
finish 2x bottom rear mounts to stop the shell moving
coolant pipes etc
sort the gaps, general fit of the doors
Think thats a big enough list for now ..... bite size chunks are best....
Chris
#35
Posted 29 September 2009 - 02:47 PM
vtec_van_back_copy.jpg 121.5K 255 downloads
#36
Posted 05 October 2009 - 07:10 PM
...
"Sorry there's an engine in the back"
Edited by miniQ, 05 October 2009 - 07:11 PM.
#37
Posted 01 January 2010 - 06:42 PM
please
#38
Posted 02 January 2010 - 05:24 AM
#39
Posted 04 January 2010 - 10:16 AM
any updates ???
please
Sorry no updates yet. ive not worked on the car since the last update. ive been building an off roader as a little side project but thats nearly finished now so ill be back on the van very soon.
chris
#40
Posted 17 January 2010 - 06:18 PM
Just noticed you have the same wheels as me. Did yours fit ok on the back. The centre of the hubs were too small on mine.
#41
Posted 24 January 2010 - 11:45 AM
Keep up the good work mate
#42
Posted 26 January 2010 - 02:57 PM
Hey
Just noticed you have the same wheels as me. Did yours fit ok on the back. The centre of the hubs were too small on mine.
Hi
ive got an 8mm spacer on the back and 3mm on the front. the hubs on mine were too small so zcars machined some out for me. they fit no probs now
thanks
chris
#43
Posted 26 January 2010 - 03:49 PM
car looks greaaat so far, loving the fuel filler vents
looks like a proper sleeper
keep up the good work!
#44
Posted 26 January 2010 - 04:56 PM
#45
Posted 27 January 2010 - 12:03 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users