52 replies to this topic

[cookie4343]

I came home friday and checked the classifieds on here and came across jo the clubby.
Plans are to turn it into a summer show car, will be still origional with 10 inch wellers or other 10's, the engine will be modded to make
it faster and thats it mod wise.
Oppinions on name- Jo or Joanne.
Ive paid the deposit and it will be with me by saturday or sunday this weekend comeing.

Attached Files

•  DSC00490_3_.jpg   17.29K   33 downloads
•  DSC00494_3_.jpg   9.67K   33 downloads
•  DSC00495_1_.jpg   13.72K   25 downloads

Edited by cookie4343, 21 November 2009 - 04:45 PM.

[84MiniMayfairAlex]

Looks Good Mate,
Good Luck,

[mighty mini jack]

GI-JOE

Looking good mate!

[Tomf]

Looks like a good project mate, i was really tempted by this when i saw it pop up in the classified, but im supposed to be cutting my projects down not collecting more lol.

[cookie4343]

Cheers for all the positive comments guys, can you help me out with a name, so far i have,
Jo
Joanne
Anne
Jody

[Mini Basher]

Hi Cookie

How about project Go Jo

Andy

[cookie4343]

Here's some more pics of the clubman as i got it today
It's pretty rotton but they all are, ive stripped most of the interior out and took lots of photo's of the rust for reference, ill be sticking
complete half floors in both sides as it has had oversills fitted, there's also boot floor repairs, flitch repairs both sides and the front end to save
which is in pretty good shape same as the roof and gutter rails.
All comments welcome, enjoy the pics.

[cookie4343]

More pics, enjoy.

[roofless]

its arrived !! might have to borrow a few measurements off this one cookie, when we do the weld-a-thon on shaggy

[cookie4343]

its arrived !! might have to borrow a few measurements off this one cookie, when we do the weld-a-thon on shaggy

No problem, but i think it's best you measure.

[Shifty]

Looks like fun Steve!

You've got a bit of welding to do there, looks a good project though. Shouldn't take you long eh??!!!

[minidream94]

this was from oxford burford wasnt it

see im clever, i was gunna get this one but another popped up

good luck with it mate

[cookie4343]

Looks like fun Steve!

You've got a bit of welding to do there, looks a good project though. Shouldn't take you long eh??!!!

Now your here, why not What do you think is the best way to go panel wise, im thinking of replaceing the whole boot floor and internal floor
or should i just buy repair sections.

[Shifty]

Are you gonna replace the heelboard?

If you do need to replace the floors/heelboard/crossmember then a full floor is about the same money and will make a better job of it.

If you do this then I'd strip the car to a shell to minimize distortion.

A boot floors a big and expensive job as well. I usually just fit a pair of corners and a part floor, much cheaper!!

[cookie4343]

Ive got a small update but not a big one, ive decided to strip the whole car back to bare metal so i can find all the rust.

Yesterday i went and took the bonnet off and made a start.

Before faded bonnet


After some nitromorse and a wire brush, i will finish the rest with my sander.


General picture of the manky sidelight indicater units, i have cleaned these and ordered more gaskets for them.