Pushed it back into its space and put the plug leads back in the correct order after a banterous day at college.
Edited by Stiggytoo, 27 November 2013 - 10:27 PM.
Posted 27 November 2013 - 10:27 PM
Pushed it back into its space and put the plug leads back in the correct order after a banterous day at college.
Edited by Stiggytoo, 27 November 2013 - 10:27 PM.
Posted 27 November 2013 - 11:48 PM
Posted 01 December 2013 - 08:08 PM
Took it out for a drive around Yorkshire dales just over 80 miles never missed a beat, then gave it a treat with grease gun.
Posted 01 December 2013 - 09:25 PM
1) fitted a home made blanking plate to sit behind the grille in an attempt to help run hotter
2) fitted new set of plugs as seems to be eating them at the mo
3) finally finished diy alloy refurb ready for winter tyres to be fitted
and finish the day watching darts final --- heaven !
Posted 01 December 2013 - 09:28 PM
pumped up the tyres. took it for a healthy spin. cleaned the glass and applied some rainx - ready for another week of commuting!
Then down to the shed with my dad, other engine, timing chain and timing cover on. flywheel and clutch assembly on. Just ancilleries and head to go nowww EEEK!
Posted 02 December 2013 - 01:03 AM
Took the wheel off because i thought one of the ball joints looked 'iffy'. Three hours later both sides suspension and steering are completely dismantled and on the garage floor
Posted 02 December 2013 - 01:31 AM
Posted 02 December 2013 - 01:03 PM
not today but saturday i got a pic of it all smoothed and base coated... pics in me project page on my sig.
Posted 02 December 2013 - 04:53 PM
fitted some new fuel hose underneath and got petrol in my eye
Posted 02 December 2013 - 05:16 PM
Started it up to see if it still could. Fuel took a while to come through but once it arrived, no bother at all. Running a bit lumpy butdidnt run it up to temperature. Still sounds epic. Miss driving it but the time of year puts a stop to that anyway!
Posted 04 December 2013 - 03:46 PM
Posted 04 December 2013 - 05:06 PM
will it be strong enough? what are you pulling?
Posted 04 December 2013 - 05:45 PM
will it be strong enough? what are you pulling?
Posted 14 December 2013 - 05:37 PM
removed passenger door then swapped the bits over to my good door, so much fun!
0 members, 1 guests, 0 anonymous users