9465 replies to this topic

[IronmanG]

Hhhmm new loom just arrived

[Tones61]

Applied choice decals to me rocker cover,

And used some a steering wheel cover to cover top column for neatness

Attached Files

•  IMG_1818.JPG   42.19K   1 downloads
•  IMG_1819.JPG   35.98K   2 downloads

[Lplus]

Finished fitting a set of HIF4 carbs to the mini.  Now to wait for good weather to get it out and try them and set them up.

[Tones61]

Ring gapping and bottom end building this afternoon,
Hot road engine,
1293 omegas,race head,10.9 comp,swifttune SW10,😎👍

Attached Files

•  IMG_1820.JPG   42.21K   0 downloads
•  IMG_1821.JPG   55K   1 downloads
•  IMG_1822.JPG   29.99K   0 downloads
•  IMG_1823.JPG   21.93K   0 downloads
•  IMG_1824.JPG   28.2K   0 downloads
•  IMG_1825.JPG   39.08K   0 downloads
•  IMG_1826.JPG   25.69K   0 downloads

[IronmanG]

Engine is on the dyno today.....
Top man on the job so I hope those dyno boys know what they are doing!

[Tones61]

More engine building today,
SW10 cam in,MED vernia on,
Mounted on box,
MED st2 light flywheel on,
Ready for JMR to set cam timing 😁

Attached Files

•  IMG_1827.JPG   43.91K   1 downloads
•  IMG_1828.JPG   43.98K   0 downloads
•  IMG_1829.JPG   39.39K   0 downloads
•  IMG_1830.JPG   42.16K   0 downloads

[Tones61]

Engine is on the dyno today.....
Top man on the job so I hope those dyno boys know what they are doing!

Let us know the full spec and outcome please dude

[IronmanG]

1310
Built by OZ
7 port injected AC dodd RS+ cam
1.3 rockers
106hp 90 lbs ft

[Ol timer]

Added another shelf to my computer desk for more minis

Attached Files

•  20210317_110450.jpg   45.69K   3 downloads

[Tones61]

More mini engine building today,
Sprayed head,
Assemble and onto block,
Checked fitted spring height,
Fitted MED 1.5 rollers,
Just awaiting rocker pedestal spacers 😃

Attached Files

•  IMG_1831.JPG   39.63K   0 downloads
•  IMG_1832.JPG   40.18K   1 downloads
•  IMG_1833.JPG   42.79K   0 downloads
•  IMG_1834.JPG   43.07K   2 downloads

[Lplus]

Took the clutch out since it stopped disengaging yesterday!

 

Parts are on order.   :moneypit:

[cooperd70]

More mini engine building today,
Sprayed head,
Assemble and onto block,
Checked fitted spring height,
Fitted MED 1.5 rollers,
Just awaiting rocker pedestal spacers 😃

Is the colour you've sprayed the head a std mini colour? If so what is it?

Build looks to be going v well by the way. 👍👍

[Tones61]

Hi Cooper's,yea it's vw pure grey aerosol,then laquerd,thanks

[IronmanG]

Started running fuel and brake lines

[Tones61]

Hi Cooper's,yea it's vw pure grey aerosol,then laquerd,thanks

Etch primered first