256 replies to this topic

[[email protected]]

CBA to trawl through 8 pages to see if this has been asked.....

but what about the clevis pin that holds the break and clutch pedals to the master cylinders?

Good thinking...

[Dan]

Standard parts don't count according to the OP. So no screws, nuts, bolts, washers, clevis pins, or METAL!

Funny that people keep mentioning parts that are one of the defining characteristics of a particular mark though! Anything you specifically look for to date a Mini isn't going to count.

[Tommyboy12]

Pushrods!

[Dan]

No!

[1984mini25]

Pushrods!

998 and 1275 ones are different lengths

[Tupers]

CBA to trawl through 8 pages to see if this has been asked.....

but what about the clevis pin that holds the break and clutch pedals to the master cylinders?

Good thinking...

Didn't they change from a just a pin to a different pin with a nylon/plastic sleeve.

[mini13]

cam thrust "triangle"

bottom suspension arm "wiggle pin"

radius arm pin

[myredmini]

seam strips ? forget that, the estates are different :/

Edited by myredmini, 18 November 2010 - 08:19 PM.

[1984mini25]

CBA to trawl through 8 pages to see if this has been asked.....

but what about the clevis pin that holds the break and clutch pedals to the master cylinders?

Good thinking...

Didn't they change from a just a pin to a different pin with a nylon/plastic sleeve.

Only on the later servo assembly ones, the clutch pedal still used the solid pin though.

[Midas Mk1]

Clutch and Brake Pedals??

[Tupers]

Clutch and Brake Pedals??

No clutch pedal on an automatic, the brake pedal might be the same though.

[minidream94]

air vents?

[[email protected]]

air vents?

No

[Tupers]

/\ No /\

[GreaseMonkey]

Plastic pipes used for the heater? Ones going to the screen demist.