Just cant get the power down!
#46
Posted 06 February 2006 - 07:08 PM
Thanks very much for all the advice.
Today I ballanced all my wheels at work. I put 2 Yokahomas On the front. Adjusted the rear suspension again so its level all round too.
Droped my tyre pressures to 28psi
The car is SOO smooth now to drive. It also stick to the road like SH!T To a Blanket! :tongue:
I actually cant believe how Grippy it is!
Its off in 2mora for a new Clutch and bearing kit Fitting.
Shall get an engine steady asap...
Will update when its all done...
ta!
#47
Posted 06 February 2006 - 07:17 PM
good lad! :wink:.......I put 2 Yokahomas On the front. Adjusted the rear suspension again so its level all round too.
Droped my tyre pressures to 28psi
#48
Posted 06 February 2006 - 07:20 PM
good lad! :wink:.......I put 2 Yokahomas On the front. Adjusted the rear suspension again so its level all round too.
Droped my tyre pressures to 28psi
Yea, I got The yokas off my other wheels. So The wheels Im selling come with 4 falkens Now. rather than 2 yokas, 2 falkens.
The yokas are about half worn. But with my whole 55bhp Of engine. Im sure they will be gone soon. :erm:
Stage 1 kit + negative camber kit. Here we come!
Oh, Needing some front Hi-lows too.
Oh, and the new Disks/pads
Erm, And the engine steady.
And....
Erm....
Oh yea! Ill be needing that CF bonnet too soon because mines started to break at the sides and its got a bit of a Kink in the bonnet. :sad:
#49
Posted 06 February 2006 - 07:34 PM
I bet you've got Yoko A008s, or 539s?
#50
Posted 06 February 2006 - 07:38 PM
The ones which have 2 Lines all the way round, Then like, Diagonal Slashes In the center of the tread.
#51
Posted 06 February 2006 - 07:57 PM
#52
Posted 06 February 2006 - 08:05 PM
Is he a forum member?
How much does he want (posted) for the hi-lows?
<|Ben|>
#53
Posted 06 February 2006 - 08:06 PM
#54
Posted 06 February 2006 - 08:11 PM
The ones which have 2 Lines all the way round, Then like, Diagonal Slashes In the center of the tread
Could have looked on the sidewall?
#55
Posted 06 February 2006 - 10:11 PM
Which means Going downstairs. going into my garage and switching on the lights so I can get a reading off my Tyre.The ones which have 2 Lines all the way round, Then like, Diagonal Slashes In the center of the tread
Could have looked on the sidewall?
nah, Thats too much efford! :tongue:
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users