#16
Posted 08 March 2013 - 03:15 PM
If you need any advise then contact the Mini Traveller Countryman Register.
http://www.minitrave...anregister.org/
And to give you a bit of inspiration here's a French registered surf blue Coutryman that was at Beaulieu a couple of years ago
#17
Posted 24 March 2013 - 10:01 AM
I have stripped the interior and the bulkhead under the bonnet and the Woody is not as bad as i thought, The doors appatures are braced and the A posts reinforced and the whole floor tub is now out and it came out very easy as you can see with all the holes.
I have fitted and aligned two good front doors and will now start to clean up the good metal at the front and rear toe board mounts and spot weld in a full M-Machine round tunnel tub.
Once the floor is in and a bit strength is back in the shell then I will start repairing the front end.
Vic.
Attached Files
#18
Posted 26 March 2013 - 05:18 PM
#19
Posted 28 April 2013 - 05:59 PM
A few photos of the progress of the Woody.
It is going fine at the moment and the M-Machine panels are fantastic.
Attached Files
Edited by victor young, 28 April 2013 - 06:01 PM.
#20
Posted 28 April 2013 - 06:04 PM
Mini Woody 28.04.13 028.JPG 38.89K 54 downloads Mini Woody 28.04.13 043.JPG 68.7K 59 downloads Mini Woody 28.04.13 056.JPG 56.74K 49 downloads Mini Woody 28.04.13 057.JPG 64.5K 41 downloads Mini Woody 28.04.13 059.JPG 45.76K 44 downloads Mini Woody 28.04.13 061.JPG 57.31K 46 downloads Mini Woody 28.04.13 062.JPG 61.34K 59 downloads Mini Woody 28.04.13 063.JPG 54.46K 62 downloads
#21
Posted 07 May 2013 - 04:53 PM
great resto project........are you looking for any Interior as I scrapped a surf blue woody 15 years ago and have still got the interior....and your welcome to it.....the only problem is I live on Jersey...........
#22
Posted 10 May 2013 - 08:32 PM
great resto project........are you looking for any Interior as I scrapped a surf blue woody 15 years ago and have still got the interior....and your welcome to it.....the only problem is I live on Jersey...........
Hello,
I am after a full surf blue interior and would pay for delivery if it is in good condition as It mightsave me a few £ in the long run.
Hope to hear back from you
Vic.
#23
Posted 12 May 2013 - 04:51 PM
More progress photos ...... Welding away... Woody 12.05.13 001.JPG 68.9K 54 downloads Woody 12.05.13 003.JPG 78.45K 37 downloads Woody 12.05.13 004.JPG 64.94K 35 downloads Woody 12.05.13 007.JPG 46.28K 23 downloads Woody 12.05.13 009.JPG 49.02K 43 downloads Woody 12.05.13 013.JPG 87.36K 59 downloads Woody 12.05.13 017.JPG 47.35K 55 downloads Woody 12.05.13 019.JPG 46.81K 59 downloads Woody 12.05.13 021.JPG 53.33K 51 downloads Woody 12.05.13 028.JPG 68.97K 68 downloads
#24
Posted 14 May 2013 - 04:22 PM
#25
Posted 14 May 2013 - 06:55 PM
No good beating arround the bush - The rust aint going to remome it'self. And I just love restoring cars
#26
Posted 02 June 2013 - 07:14 PM
More progress on my not so rusty Woody.......
Attached Files
#27
Posted 02 June 2013 - 07:18 PM
A few more photo's
Attached Files
#28
Posted 26 July 2013 - 04:59 PM
More update photos, Been busy welding and grinding...
Attached Files
#29
Posted 26 July 2013 - 07:16 PM
cracking work being done here keep it up mate will look mint when its done
#30
Posted 28 July 2013 - 10:27 AM
what is the copper paint your using? is it some sort of primer ?
Edited by mikeb 16v, 28 July 2013 - 01:15 PM.
Also tagged with one or more of these keywords: estate
Projects →
Mini Variants →
Bloke With No Mechanical Experience Tries To Restore A 19Something Mini VanStarted by jordan1981 , 19 Feb 2017 van, estate |
|
|
||
Projects →
Mini Variants →
1980 Clubman Estate "oscar" 🇮🇪Started by Langers#56 , 13 Oct 2015 estate |
|
|
||
Projects →
Mini Variants →
The History Of "tango" My 78 Clubman EstateStarted by chipster196 , 19 May 2015 estate |
|
|
||
Projects →
Mini Variants →
1963 Countryman...changesStarted by eurosteves , 17 Mar 2015 estate, van |
|
|
||
Projects →
Mini Variants →
Adam's Beautiful Mk2 Clubby EstateStarted by Vegas superstar , 01 Jan 2015 estate |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users