depending on the rating of the switches I'd go something like this
green switch
brown wire off loom in
then out you would need a wire going to the red switch and also going to the green light.
And also to any stage 1 items you want to come on such as radio.....you'd have to check wiring diagram for car.
red switch
feed in would be from green switch
feed out would be attached to the white wires in the loom and also to the red light. and also to the starter button
starter button feed in from red switch feed out goes to starter solenoid or relay, again check wiring.
the red and green lights would need either an earth or I guess you could make them oil and ignition wiring by replacing the earth with alternator small wire and oil pressure sender wire.
The above should then give you
green switch on, green light comes on plus radio live and red switch as power in
red switch on, green light comes on, starter button now live, coil live, plus anything else needing be live.
press button car starts and if green and red light wired to alternator and oil sender those lights go out ?? , if wired to earths they stay on
Edited by lrostoke, 05 August 2013 - 05:34 PM.